Strong nonlinear dynamics of MEMS and NEMS structures based on semi-analytical approaches

被引:31
作者
Ben Sassi, Sarah [1 ]
Najar, Fehmi [1 ]
机构
[1] Univ Carthage, Tunisia Polytech Sch, Appl Mech & Syst Res Lab, BP 743, La Marsa 2078, Tunisia
来源
COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION | 2018年 / 61卷
关键词
MEMS; NEMS; Reduced-Order model; Strong nonlinearity; Limit-cycle solution; ELECTROSTATICALLY ACTUATED MICROBEAM; REDUCED-ORDER MODEL; PULL-IN INSTABILITY; RESONATORS; VIBRATION; BEAMS;
D O I
10.1016/j.cnsns.2018.01.022
中图分类号
O29 [应用数学];
学科分类号
070104 ;
摘要
The aim of this work is to derive a reduced order model (ROM) for an electrostatically actuated micro and nano structures which can be valid for relatively large displacements and high voltages. The study also presents a comparison between available semi-analytical ROMs based on Galerkin decomposition and Differential Quadrature Method (DQM) applied on micro and nano electrically actuated beams. The proposed ROM is an innovative approach to properly and accurately consider the electrostatic forces and account for the geometric nonlinearities in the derived equations of motion. The proposed ROM is derived by employing a mathematical model using the nonlinear Euler-Bernoulli theory, the DQM is employed to extract the mode shapes of the micro/nano beams. Discretized Galerkin approach in association with DQM is then utilized as a ROM and the Finite Difference Method (FDM) is employed to calculate limit-cycle solutions. The proposed ROM is used to investigate the effect of the strain's third order nonlinearities on the dynamic responses of micro/nano beams. A comparative study in terms of convergence and computational time is carried out on several ROMs based on modal decomposition for different mode shapes, and by performing or not the well known multiplication by the force denominator term in the equation of motion. As a benchmark, Local adaptive DQM (LaDQM) in combination with Long Time Integration are employed and their convergence is studied. Important outcomes of this study reveal the appropriateness of using only one mode in the discretized Galerkin approach for doubly clamped and cantilever at micro and nano scales, even when high voltages are applied. Besides, the results demonstrate that using high AC voltages for the actuation signal can lead to a non-negligible shifting effect regarding the equilibrium positions and the associated natural frequencies of a dynamic solution. An updated solution is proposed to predict this mismatch. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码:1 / 21
页数:21
相关论文
共 45 条
  • [21] Analytical modeling of mechanical behavior for MEMS/NEMS-based single-clamped multilayer resonators with symmetrical complex shapes
    Martinez-Cisneros, Eustaquio
    Velosa-Moncada, Luis A.
    Elvira-Hernandez, Ernesto A.
    Gonzalez-Esparza, Daniel
    Aguilera-Cortes, Luz Antonio
    Lopez-Huerta, Francisco
    Herrera-May, Agustin L.
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2021, 27 (05): : 2167 - 2182
  • [22] Semi-analytical predictions of multi-stable independent periodic motions and bifurcation evolution in a nonlinear bolted rotor system
    Zhao, Runchao
    Jiao, Yinghou
    Xu, Yeyin
    Li, Zhitong
    Chen, Zengtao
    Chen, Zhaobo
    COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 2024, 132
  • [23] Combined semi-analytical and numerical vibro-acoustic design approach for anisotropic fibre-reinforced composite structures
    Dannemann, Martin
    Taeger, Olaf
    Modler, Niels
    JOURNAL OF SOUND AND VIBRATION, 2017, 404 : 1 - 14
  • [24] A Semi-Analytical and Computationally Efficient Method to Calculate the Touch-Point Pressure and Pull-In Voltage of a MEMS Pressure Sensor With a Circular Diaphragm
    Jindal, Sumit Kumar
    Sethi, Krish
    Patel, Ishan
    Kumar, Ajay
    Raghuwanshi, Sanjeev Kumar
    IEEE SENSORS JOURNAL, 2021, 21 (02) : 1332 - 1339
  • [25] A semi-analytical bearing model considering outer race flexibility for model based bearing load monitoring
    Kerst, Stijn
    Shyrokau, Barys
    Holweg, Edward
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2018, 104 : 384 - 397
  • [26] Influence of thermo-mechanical loads on variable stiffness composite beams: a comprehensive study using semi-analytical and finite element approaches
    Dash, Satyajeet
    Dey, Tanish
    Hati, Debarati
    MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 2024, 52 (12) : 10555 - 10582
  • [27] Size-dependent pull-in voltage and nonlinear dynamics of electrically actuated microcantilever-based MEMS: A full nonlinear analysis
    Dai, H. L.
    Wang, L.
    COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 2017, 46 : 116 - 125
  • [28] Predicting delamination in composite laminates through semi-analytical dynamic analysis and vibration-based quantitative assessment
    Wang, Jianfei
    Chang, Zhaolin
    Cao, Gan
    Lai, Siu-Kai
    THIN-WALLED STRUCTURES, 2024, 204
  • [29] A semi-analytical and numerical approach for solving 2-DOF and 6-DOF nonlinear and complex functionally graded tubular systems
    Dai, Liming
    Foroutan, Kamran
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2024, 46 (11)
  • [30] A semi-analytical solution for free vibration analysis of rotating carbon nanotube with various boundary conditions based on nonlocal theory
    Talebitooti, Mostafa
    MATERIALS RESEARCH EXPRESS, 2019, 6 (09):