Power Consumption of Mixing Vessel with Draft Tube

被引:5
作者
Furukawa, Haruki [1 ]
Kato, Yoshihito [1 ]
Tada, Yutaka [1 ]
Koh, Song-Tae [2 ]
Lee, Yong-Sei [3 ]
机构
[1] Nagoya Inst Technol, Dept Life & Mat Engn, Showa Ku, Nagoya, Aichi 4668555, Japan
[2] Dongyang Univ, Dept Biochem Engn, Yeongju 750711, Kyungbuk, South Korea
[3] Kyungpook Natl Univ, Sch NANO & Mat Engn, Sangju 742711, Kyungpook, South Korea
关键词
Mixing; Agitation; Power Consumption; Draft Tube; AGITATED VESSELS; PADDLE IMPELLER;
D O I
10.1252/kakoronbunshu.39.9
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Mixing vessels with draft tubes are used in industrial processes, but power number data have not been published for this type of vessel. In this study, the power characteristics of a mixing vessel with draft tube were measured for various conditions of draft tube and mixing impeller geometry. The power number was found not to be affected by the geometry of the draft tube, but greatly affected by the impeller geometry. The power number of the mixing vessel with a draft tube was larger than that without a draft tube. It was also found that the power number of a vessel with draft tube and a paddle impeller or pitched paddle impeller corresponded to those of a vessel without draft tube and with a ratio of baffle width to vessel diameter of B-W/D=0.05 and 0.08, respectively.
引用
收藏
页码:9 / 12
页数:4
相关论文
共 50 条
[41]   Experimental investigation and CFD simulation of power consumption for mixing in Gyro Shaker [J].
Samad, P. A. Abdul ;
Shalij, P. R. .
INTERNATIONAL JOURNAL OF COMPUTATIONAL SCIENCE AND ENGINEERING, 2020, 21 (02) :188-201
[42]   The effect of the draft tube geometry on mixing in a reactor with an internal circulation loop - A CFD simulation [J].
Lestinsky, P. ;
Vecer, M. ;
Vayrynen, P. ;
Wichterle, K. .
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2015, 94 :29-34
[43]   Effects of Sparger Geometry on Power Consumption and Mass Transfer in a Gas-Liquid Agitated Vessel with Disk Turbine [J].
Kamei, Noboru ;
Kato, Yoshihito ;
Tada, Yutaka ;
Ando, Junichi ;
Nagatsu, Yuichiro .
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2009, 42 (09) :664-668
[44]   EFFECTS OF IMPELLER DIMENSIONS AND POSITION ON POWER-CONSUMPTION IN A BAFFLED AGITATED VESSEL [J].
KAMEI, N ;
HIRAOKA, S ;
KATO, Y ;
TADA, Y ;
ISHIZUKA, H ;
IWATA, K ;
LEE, YS ;
YAMAGUCHI, T ;
KOH, ST .
KAGAKU KOGAKU RONBUNSHU, 1995, 21 (04) :696-702
[45]   An effect of a baffle length on the power consumption in an agitated vessel [J].
Karcz, J ;
Major, M .
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 1998, 37 (03) :249-256
[46]   Effect of draft tube position on the hydrodynamics of a draft tube slurry bubble column [J].
Pironti, FF ;
Medina, VR ;
Calvo, R ;
Saez, AE .
CHEMICAL ENGINEERING JOURNAL AND THE BIOCHEMICAL ENGINEERING JOURNAL, 1995, 60 (1-3) :155-160
[47]   Power consumption during oscillatory mixing of pharmaceutical powders [J].
Hilden, J. ;
Sullivan, M. ;
Polizzi, M. ;
Wade, J. ;
Greer, J. ;
Keeney, M. .
POWDER TECHNOLOGY, 2018, 338 :44-54
[48]   Impeller Submergence Depth on Power Consumption of Mixing Tank [J].
Kumar, Bimesh ;
Devi, Thiyam T. .
Environmental Science and Development, 2011, 4 :76-78
[49]   Effect of height of packed bed in downcomer on liquid mixing time in bubble column with draft tube [J].
Kawasaki, H ;
Miyakoshi, Y ;
Kumazawa, H .
KAGAKU KOGAKU RONBUNSHU, 1998, 24 (06) :972-974
[50]   Effect of Impeller Blade Angle on Power Consumption and Flow Pattern in Horizontal Stirred Vessel [J].
Yang, Tao ;
Takahashi, Koji .
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2010, 43 (08) :635-640