Estimation of temperature effects on autogenous shrinkage of concrete by a new prediction model

被引:112
作者
Chu, Inyeop [1 ]
Kwon, Seung Hee [2 ]
Amin, Muhammad Nasir [3 ]
Kim, Jin-Keun [1 ]
机构
[1] Korea Adv Inst Sci & Technol, Dept Civil & Environm Engn, Taejon 305701, South Korea
[2] Myoungji Univ, Dept Civil & Environm Engn, Yongin, Gyonggi Do, South Korea
[3] NUST, Sch Civil & Environm Engn, NUST Inst Civil Engn, Islamabad, Pakistan
关键词
Autogenous shrinkage; Curing temperature; Maturity; Activation energy; APPARENT ACTIVATION-ENERGY; HIGH-PERFORMANCE CONCRETE; RELATIVE-HUMIDITY CHANGE; EARLY-AGE SHRINKAGE; CEMENT PASTE; DEFORMATION; STRENGTH;
D O I
10.1016/j.conbuildmat.2012.03.005
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
To accurately estimate the temperature effects on autogenous shrinkage of concrete, a new prediction model based on time-temperature dependent activation energy is proposed in this study. For this purpose, a series of autogenous shrinkage tests are performed considering different water to cementitious materials ratios and curing temperatures. Results revealed that the temperature dependency of autogenous shrinkage cannot be described solely by the simple time shift of the existing maturity method. In particular, maturity cannot incorporate the cross-over effect of autogenous shrinkage by which later age autogenous shrinkage of concrete, subjected to low curing temperature, usually exceeds the autogenous shrinkage of concrete subjected to relatively high curing temperature. Therefore, to overcome the shortcomings of the maturity method, a new prediction model based on time-temperature dependent activation energy is proposed. Reasonably good agreement is observed between experimental and predicted autogenous shrinkage, thus indicating that the proposed prediction model can be successfully used to estimate the time-temperature effects in the development of autogenous shrinkage. However, the absolute value of autogenous shrinkage strain still cannot be obtained from the proposed model, because the model gives only the development of autogenous shrinkage. Therefore, a prediction model for the absolute value of autogenous shrinkage is needed in order to obtain predicted autogenous shrinkage strain. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:171 / 182
页数:12
相关论文
共 42 条
  • [1] American Society for Testing and Materials, C494C494M11 ASTM
  • [2] American Society for Testing and Materials, C39C39M11A ASTM
  • [3] American Society for Testing and Materials, C12807A ASTM
  • [4] American Society for Testing and Materials, C12707 ASTM
  • [5] Simulation of the thermal stress in mass concrete using a thermal stress measuring device
    Amin, Muhammad Nasir
    Kim, Jeong-Su
    Lee, Yun
    Kim, Jin-Keun
    [J]. CEMENT AND CONCRETE RESEARCH, 2009, 39 (03) : 154 - 164
  • [6] [Anonymous], C496C496M11 ASTM
  • [7] [Anonymous], P INT WORKSH AUT SHR
  • [8] [Anonymous], C469C469M10 ASTM
  • [9] [Anonymous], 2010, IES J A
  • [10] Bjontegaard O, 2004, AMER CONC I, V220, P125