Development of Low Cost System for Condition Monitoring of Rolling Element Bearing Using MEMS Based Accelerometer

被引：5

作者：

Gopalakrishna, Gururaj K. ^{[1
]}

Padubidre, Srinivasa Pai ^{[1
]}

机构：

[1] NMAM Inst Technol, Dept Mech Engn, Karkala 574110, Karnataka, India

来源：

EMERGING TRENDS IN MECHANICAL ENGINEERING 2018 | 2019年 / 2080卷

关键词：

Condition Monitoring; Vibration analysis; Rolling Element Bearing; MEMS accelerometer; Time domain; Frequency domain;

D O I：

10.1063/1.5092931

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Condition monitoring is the most important aspect to predict the working condition of any machine. Among the various condition monitoring techniques, vibration monitoring is an important technique. This paper illustrates a low cost technique being developed for the vibration monitoring of the rolling element bearing. The main hardware used in this system consists of a MEMS accelerometer and an Arduino UNO microcontroller. Arduino UNO is used as the data acquisition system to receive the vibration signals from the MEMS accelerometer and transfer it to the computer through serial communication. MATLAB software is used for the time domain and frequency domain analysis of the vibration data.

引用

页数：8

共 50 条

[1] Low cost MEMS accelerometer and microphone based condition monitoring sensor, with LoRa and Bluetooth Low Energy radio
Jakobsen, Morten Opprud
HARDWAREX, 2024, 18
[2] Development of an IoT Monitoring System for Bridge Bearing Movement using a MEMS Accelerometer-based Inclination Sensing
Fernando, Heshan
Heykoop, Isabel
Woods, Joshua
Hoult, Neil
2022 IEEE CANADIAN CONFERENCE ON ELECTRICAL AND COMPUTER ENGINEERING (CCECE), 2022, : 314 - 318
[3] DEVELOPMENT OF ROLLING BEARING HEALTH DIAGNOSIS AND PREDICTION SYSTEM USING MEMS ACCELEROMETER VIBRATION SENSING MODULE
Satija, Jyoti
Huang, Po-Wen
Singh, Somnath
Shen, Tung
Chen, Hung-Yu
Li, Sheng-Shian
2022 IEEE 35TH INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS CONFERENCE (MEMS), 2022, : 446 - 449
[4] Rolling Element bearing condition monitoring and Diagnosis
Lin Huibin
Ding Kang
MECHANICAL ENGINEERING AND GREEN MANUFACTURING, PTS 1 AND 2, 2010, : 332 - 337
[5] Condition-based monitoring system for rolling element bearing using a generic multi-layer perceptron
de Almeida, Luis F.
Bizarria, Jose W. P.
Bizarria, Francisco C. P.
Mathias, Mauro H.
JOURNAL OF VIBRATION AND CONTROL, 2015, 21 (16) : 3456 - 3464
[6] Rolling element bearing condition monitoring using acoustic emission technique
Hemmati, F.
Orfali, W.
Gadala, M. S.
PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2012) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2012), 2012, : 699 - 713
[7] Condition Monitoring of Rolling Element Bearing by Acoustic Analysis Using LabVIEW
Nadar, Anish
Sangam, Rajanarasimha
PROCEEDINGS OF INTERNATIONAL CONFERENCE ON INTELLIGENT MANUFACTURING AND AUTOMATION (ICIMA 2018), 2019, : 697 - 709
[8] Condition Monitoring of Rolling Element Bearing Based on Phase-PCA
Jiang, Liying
Liu, Zhipeng
Cui, Jianguo
Li, Zhonghai
2013 25TH CHINESE CONTROL AND DECISION CONFERENCE (CCDC), 2013, : 1082 - 1086
[9] Condition monitoring analysis of rolling element bearing based on frequency envelope
Kulkarni, Vinayak V.
Khadersab, A.
MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 4667 - 4671
[10] Condition monitoring of low-speed and heavily loaded rolling element bearing
Liu, Rende
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2007, 59 (06) : 297 - 300

← 1 2 3 4 5 →