Assessment of the CO2 emission and cost reduction performance of a low-carbon-emission concrete mix design using an optimal mix design system

被引:78
|
作者
Kim, Taehyoung [1 ]
Tae, Sungho [1 ,2 ]
Roh, Seungjun [1 ]
机构
[1] Hanyang Univ, Sch Architecture & Architectural Engn, Ansan 426791, Gyeonggi Do, South Korea
[2] Sustainable Bldg Res Ctr SUSB, Ansan 426791, South Korea
关键词
Optimal mix design system; Concrete; CO2; emission; Cost; Reduction performance; GENETIC ALGORITHM;
D O I
10.1016/j.rser.2013.05.013
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The production of concrete, a major construction material, emits a large amount of CO2 from the material production stage, such as in the production of cement, aggregates, and admixtures, to the manufacturing stage, and it is expected that a reduction of CO2 emission will be required. Accordingly, a study on the assessment of the appropriate amount of CO2 emission in the concrete production is necessary. As a result, in environmentally developed countries, studies have been conducted on the production of low-CO2-emitting concrete, such as a low-carbon concrete procurement system, but studies on this topic have been insufficient in Korea. Therefore, this study evaluated the appropriateness and the reduction performance of the low-carbon-emission concrete (LCEC) mix design system and the deduced mix design results using an evolutionary algorithm (EA), the optimal mix design method, which minimizes the CO2 emission of the concrete mix design. This study established a mix design database from approximately 800 concrete mix designs with different strengths and used an EA to deduce the optimal mix design. When deducing the optimal mix design, we considered design variables, object functions, and constraint functions to develop the algorithm. Then, the appropriateness and reliability of the mix design deduced from the optimal LCEC mix design system, which in turn was developed by using the above algorithm, were evaluated. Additionally, case studies of current structures in Korea were divided into the actual concrete mix designs and the deduced optimal mix designs, which were compared to analyze the CO2 emissions. According to the case study of the concrete mix design deduced from this assessment system, the CO2 emissions of the optimal mix design compared to the actual mix design were reduced by 4 and 7% for 24 and 30 MPa concrete, respectively. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码:729 / 741
页数:13
相关论文
共 50 条
  • [31] Three-layer design and optimization of CO2 emission reduction in the iron and steel industry based on 'BRL' industrial metabolism
    Chen, Junwen
    Gong, Qingshan
    Cao, Zhanlong
    Liu, Min
    Xie, Minchao
    Zhao, Gang
    ENERGY, 2025, 315
  • [32] White-Tailed Eagle Algorithm for Global Optimization and Low-Cost and Low-CO2 Emission Design of Retaining Structures
    Arandian, Behdad
    Iraji, Amin
    Alaei, Hossein
    Keawsawasvong, Suraparb
    Nehdi, Moncef L.
    SUSTAINABILITY, 2022, 14 (17)
  • [33] Simultaneous reduction of NO-smoke-CO2 emission in a biodiesel engine using low-carbon biofuel and exhaust after-treatment system
    Thiyagarajan, S.
    Geo, V. Edwin
    Martin, Leenus Jesu
    Nagalingam, B.
    CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, 2017, 19 (05) : 1271 - 1283
  • [34] An integrated design method for CO2 emission reduction based on industrial metabolism:Hybrid carbon-hydrogen metallurgy manufacturing process (HCHMP)
    Chen, Junwen
    Sun, Qing
    Gong, Qingshan
    Wang, Mengzhen
    Hu, Teng
    Huang, Zhenyu
    Zhao, Gang
    JOURNAL OF CLEANER PRODUCTION, 2025, 486
  • [35] Simulation for optimal mixture design of low-CO2 high-volume fly ash concrete considering climate change and CO2 uptake
    Wang, Xiao-Yong
    CEMENT & CONCRETE COMPOSITES, 2019, 104
  • [36] Life cycle assessment of CO2 emission reduction potential of carbon capture and utilization for liquid fuel and power cogeneration
    He, Yangdong
    Zhu, Lin
    Fan, Junming
    Li, Luling
    Liu, Gaihuan
    FUEL PROCESSING TECHNOLOGY, 2021, 221
  • [37] CO2 footprint reduction via the optimal design of Carbon-Hydrogen-Oxygen SYmbiosis Networks (CHOSYNs)
    Panu, Marc
    Topolski, Kevin
    Abrash, Sarah
    El-Halwagi, Mahmoud M.
    CHEMICAL ENGINEERING SCIENCE, 2019, 203 : 1 - 11
  • [38] ENERGY-EFFICIENT INLAND CARGO SHIP DESIGN BASED ON FUEL CONSUMPTION AND CO2 EMISSION CONTROL USING CFD
    Hasan, S. M. Rashidul
    Karim, M. Mashud
    JOURNAL OF NAVAL ARCHITECTURE AND MARINE ENGINEERING, 2023, 20 (03):
  • [39] A conceptual design by integrating dimethyl ether (DME) production with tri-reforming process for CO2 emission reduction
    Zhang, Yishan
    Zhang, Shujing
    Benson, Tracy
    FUEL PROCESSING TECHNOLOGY, 2015, 131 : 7 - 13
  • [40] Optimal Mixture Design of Low-CO2 High-Volume Slag Concrete Considering Climate Change and CO2 Uptake
    Han-Seung Lee
    Seung-Min Lim
    Xiao-Yong Wang
    International Journal of Concrete Structures and Materials, 2019, 13