Roles of Manganese in the High-temperature Oxidation Resistance of Alumina-forming Austenitic Steels at above 800 °C

被引：28
|
作者：
Xu, Xiangqi [1 ,2 ]
Zhang, Xiaofeng [1 ]
Sun, Xiaoyang [1 ]
Lu, Z. P. [1 ]
机构：
[1] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China
[2] Tongling Univ, Dept Mech Engn, Tongling 244000, Peoples R China
来源：
OXIDATION OF METALS | 2012年 / 78卷 / 5-6期
关键词：
Austenitic steels; Oxide; Alumina; Oxidation; STAINLESS-STEELS; CREEP-RESISTANT; SCALE FORMATION; SOLID-OXIDE; ALLOYS; BEHAVIOR; 900-DEGREES-C; ADDITIONS; PHASE;
D O I：
10.1007/s11085-012-9311-9
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A new family of alumina-forming austenitic (AFA) stainless steels is under development for uses in aggressive oxidizing conditions. This paper investigates the effect of manganese additions on the oxidation kinetics and alumina scale formation in two series of AFA steels, i.e., Fe-20Ni-14Cr-2.5Al and Fe-18Cr-25Ni-3Al base. At 800 degrees C in dry air, the oxidation resistance was moderately degraded with additions of larger than 1 wt% Mn in the AFA steels based on Fe-14Cr-20Ni-2.5Al. At 900 degrees C in air with 10 % water vapor, however, additions of Mn in these AFA steels based on Fe-18Cr-25Ni-3Al would significantly destabilize the alumina scale formation and degrade the oxidation resistance. Our analysis revealed that additions of Mn stimulated formation of the coarse spinel CrMn1.5O4 and Cr2O3 oxide and destroyed the continuity of the protective alumina scales, thus worsening the oxidation performance. In addition, it was found that there exists an upper limit for the Mn additions which is decreased with the increase of the service temperatures and presence of aggressive oxidizing agents.
引用
收藏
页码：349 / 362
页数：14
相关论文
共 50 条
  • [1] Roles of Manganese in the High-temperature Oxidation Resistance of Alumina-forming Austenitic Steels at above 800 °C
    Xiangqi Xu
    Xiaofeng Zhang
    Xiaoyang Sun
    Z. P. Lu
    Oxidation of Metals, 2012, 78 : 349 - 362
  • [2] Improvement of high-temperature oxidation resistance and strength in alumina-forming austenitic stainless steels
    Xu, Xiangqi
    Zhang, Xiaofeng
    Chen, Guoliang
    Lu, Zhaoping
    MATERIALS LETTERS, 2011, 65 (21-22) : 3285 - 3288
  • [3] Overview of Strategies for High-Temperature Creep and Oxidation Resistance of Alumina-Forming Austenitic Stainless Steels
    Yamamoto, Y.
    Brady, M. P.
    Santella, M. L.
    Bei, H.
    Maziasz, P. J.
    Pint, B. A.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (04): : 922 - 931
  • [4] High-Temperature Oxidation Resistance of Alumina-Forming Austenitic Stainless Steels Optimized by Refractory Metal Alloying
    Zhang, Shuqi
    Dong, Dandan
    Wang, Qing
    Dong, Chuang
    Yang, Rui
    METALS, 2021, 11 (02) : 1 - 18
  • [5] Precipitate characteristics and their effects on the high-temperature creep resistance of alumina-forming austenitic stainless steels
    Zhou, D. Q.
    Zhao, W. X.
    Mao, H. H.
    Hu, Y. X.
    Xu, X. Q.
    Sun, X. Y.
    Lu, Z. P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 622 : 91 - 100
  • [6] Co-optimization of wrought alumina-forming austenitic stainless steel composition ranges for high-temperature creep and oxidation/corrosion resistance
    Brady, M. P.
    Magee, J.
    Yamamoto, Y.
    Helmick, D.
    Wang, L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 590 : 101 - 115
  • [7] Effects of Cr and Si addition on the high-temperature oxidation resistance in high-Mn alumina-forming oxide dispersion strengthened austenitic steels
    Geng, Diancheng
    Yu, Hao
    Yuan, Xinwei
    Kondo, Sosuke
    Miyazawa, Junichi
    Kasada, Ryuta
    NUCLEAR MATERIALS AND ENERGY, 2024, 38
  • [8] The development of alumina-forming austenitic stainless steels for high-temperature structural use
    M. P. Brady
    Y. Yamamoto
    M. L. Santella
    P. J. Maziasz
    B. A. Pint
    C. T. Liu
    Z. P. Lu
    H. Bei
    JOM, 2008, 60
  • [9] Role of Cr Content in Microstructure, Creep, and Oxidation Resistance of Alumina-Forming Austenitic Alloys at 850-900 °C
    Yamamoto, Yukinori
    Ren, Qing-Qiang
    Brady, Michael P.
    METALS, 2022, 12 (05)
  • [10] Effect of Mn content on the high-temperature oxidation behaviors of Mn-substituted-for-Ni alumina-forming austenitic stainless steel
    Zhao, Yanjun
    Chen, Peilin
    Wen, Weiying
    Deng, Yongjie
    Peng, Kaiwei
    Liu, Yafei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 7816 - 7828
12345