Numerical analysis of the Nb(C,N) precipitation kinetics in microalloyed steels

被引:0
作者
Pudar, Milan [1 ]
Kozeschnik, Ernst [1 ,2 ]
Sormann, Axel [3 ]
Parteder, Erik [4 ]
机构
[1] Graz Univ Technol, Inst Mat Sci Welding & Forming, A-8010 Graz, Austria
[2] Mat Ctr Leoben Forsch GmbH, A-8700 Leoben, Austria
[3] Voestalpine Stahl Donawitz GmbH & Co KG, A-8700 Leoben, Austria
[4] Voestalpine Stahl Linz GmbH, A-4031 Linz, Austria
关键词
Nb(C; N) precipitation kinetics; microalloyed steel; TTP diagram;
D O I
10.1002/srin.200806180
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Precipitation kinetics of Nb(C,N) in microalloyed steels is crucial for the achievement of favoured steel properties. Therefore, numerous experimental studies have been performed in the past and various theoretical models have been developed to describe Nb(C,N) precipitation. However, the experimental data is sometimes contradictory and even the thermodynamic data for NbC solubility in austenite have a large scatter. In this paper, experimental results on the Nb(C,N) and NbV(C,N) precipitation kinetics in deformed and undeformed austenite are reviewed. Based on these data and with the precipitation kinetics module of the software package MatCalc, computer simulations are performed. The predicted interfacial energy of precipitates is adjusted to match the observed kinetics. A comparison between experimental information and simulation, i.e. time - temperature - precipitation (TTP) diagrams, is drawn and discussed. The results of the computer simulations using modified interfacial energies are in good agreement with the experiments.
引用
收藏
页码:660 / 664
页数:5
相关论文
共 50 条
  • [31] Influence of (Al, Nb, V) precipitates on the recrystallization inhibition in microalloyed steels
    Gomez, Manuel
    Quispe, Alberto
    Medina, Sebastian F.
    RECRYSTALLIZATION AND GRAIN GROWTH V, 2013, 753 : 435 - +
  • [32] Determination of Nb(C, N) dissolution temperature by electrical resistivity measurement in a low-carbon microalloyed steel
    Park, J. S.
    Lee, Y. K.
    SCRIPTA MATERIALIA, 2007, 56 (03) : 225 - 228
  • [33] Influence mutual of the deformation and chemical composition on induced precipitation in microalloyed steels
    Quispe, A
    Medina, SF
    Gómez, M
    REVISTA DE METALURGIA, 2005, : 384 - 389
  • [34] Dissolution and precipitation behaviour in steels microalloyed with niobium during thermomechanical processing
    Gong, P.
    Palmiere, E. J.
    Rainforth, W. M.
    ACTA MATERIALIA, 2015, 97 : 392 - 403
  • [35] A modified Avrami equation for kinetics of static recrystallization of Nb-V microalloyed steel: Experiments and numerical simulation
    Shen, Wenfei
    Zhang, Chi
    Zhang, Liwen
    Xu, Qianhong
    Cui, Yan
    Xu, Yifeng
    VACUUM, 2018, 150 : 116 - 123
  • [36] Influence of Cu alloying on hot ductility of C-Mn-Al and Ti-Nb microalloyed steels
    Comineli, O
    Luo, H
    Liimatainen, HM
    Karjalainen, LP
    REVISTA DE METALURGIA, 2005, : 407 - 411
  • [37] Effects of Sn and Sb on the Hot Ductility of Nb plus Ti Microalloyed Steels
    He, Chunyu
    Wang, Jianguang
    Chen, Yulai
    Yu, Wei
    Tang, Di
    METALS, 2020, 10 (12) : 1 - 10
  • [38] Effects of V and Nb on static recrystallisation of austenite and precipitate size in microalloyed steels
    S. F. Medina
    M. Gómez
    P. P. Gómez
    Journal of Materials Science, 2010, 45 : 5553 - 5557
  • [39] RETRACTED ARTICLE: Modeling hardness of Nb-microalloyed steels using fuzzy logic
    Gholamreza Khalaj
    Hossein Yoozbashizadeh
    Alireza Khodabandeh
    Ali Nazari
    Neural Computing and Applications, 2013, 23 : 207 - 214
  • [40] Effect of Mo, Nb and V on Hot Deformation Behaviour, Microstructure and Hardness of Microalloyed Steels
    Singh, Navjeet
    Kostryzhev, Andrii G.
    Killmore, Chris R.
    Pereloma, Elena V.
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 3 - 8