Cogging torque and torque ripple analysis of permanent magnet flux-switching machine having two stators

被引:5
作者
Awah, Chukwuemeka Chijioke [1 ]
Okoro, Ogbonnaya Inya [1 ]
Chikuni, Edward [2 ]
机构
[1] Michael Okpara Univ Agr, Dept Elect & Elect Engn, PMB 7267, Umudike, Nigeria
[2] Univ Zimbabwe, Dept Elect Engn, Harare, Zimbabwe
关键词
cogging torque; torque ripple; separate stators; unbalanced magnetic force; DESIGN; PERFORMANCE; REDUCTION; FORCE; PULL;
D O I
10.24425/aee.2019.125984
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The analysis of cogging torque, torque ripple and total harmonic distortion of a permanent magnet (PM) flux-switching machine having separate excitation stators is presented in this study. Further, the effect of unbalanced magnetic force (UMF) on the rotor of this machine is also investigated. A comparison of the analysed machine having different rotor pole configurations is also given. The analysis shows that the largest cogging torque, torque ripple as well as total harmonic distortion (THD) are obtained in the four-rotor-pole machine while the least of THD and torque ripple effects is seen in the thirteen-rotor-pole machine. Furthermore, the evaluation of the radial magnetic force of the machines having an odd number of rotor poles shows that the investigated machine having a five-rotor-pole number exhibits the highest value of UMF, while the smallest amount of UMF is obtained in an eleven-rotor-pole machine. Similarly, it is observed that the machines having an even number of rotor poles exhibit a negligible amount of UMF compared to the ones of the odd number of rotor poles.
引用
收藏
页码:115 / 133
页数:19
相关论文
共 31 条
[1]   Reduction of the Torque Ripple and Magnetic Force of a Rotatory Two-Phase Transverse Flux Machine Using Herringbone Teeth [J].
Ahn, Heetae ;
Jang, Gunhee ;
Chang, Junghwan ;
Chung, Shiuk ;
Kang, Dohyun .
IEEE TRANSACTIONS ON MAGNETICS, 2008, 44 (11) :4066-4069
[2]  
Awah C., 2016, P IEEE VEH POW PROP, P1, DOI DOI 10.1109/VPPC.2016.7791709
[3]   Review of Design Solutions for Internal Permanent-Magnet Machines Cogging Torque Reduction [J].
Bianchini, Claudio ;
Immovilli, Fabio ;
Lorenzani, Emilio ;
Bellini, Alberto ;
Davoli, Matteo .
IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (10) :2685-2693
[4]   Comparison of the unbalanced magnetic pull mitigation by the parallel paths in the stator and rotor windings [J].
Burakov, Andrej ;
Arkkio, Antero .
IEEE TRANSACTIONS ON MAGNETICS, 2007, 43 (12) :4083-4088
[5]  
Chandan S., 2015, IEEE T IND APPL, V51, P3609
[6]   Influence of Slot Opening on Optimal Stator and Rotor Pole Combination and Electromagnetic Performance of Switched-Flux PM Brushless AC Machines [J].
Chen, J. T. ;
Zhu, Z. Q. ;
Iwasaki, S. ;
Deodhar, Rajesh P. .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2011, 47 (04) :1681-1691
[7]   A Novel E-Core Switched-Flux PM Brushless AC Machine [J].
Chen, J. T. ;
Zhu, Z. Q. ;
Iwasaki, S. ;
Deodhar, Rajesh P. .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2011, 47 (03) :1273-1282
[8]   Comparison of All- and Alternate-Poles-Wound Flux-Switching PM Machines Having Different Stator and Rotor Pole Numbers [J].
Chen, J. T. ;
Zhu, Z. Q. .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2010, 46 (04) :1406-1415
[9]   Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC Machines [J].
Chen, J. T. ;
Zhu, Z. Q. .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2010, 25 (02) :293-302
[10]  
Chen J.T., 2008, Power Electronics, Machines and Drives, P111