Numerical studies on the effect of transverse speed in friction stir welding

被引：66
作者：
Zhang, Z. [1 ]
Zhang, H. W. [1 ]
机构：
[1] Dalian Univ Technol, Fac Vehicle Engn & Mech, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China
来源：
MATERIALS & DESIGN | 2009年 / 30卷 / 03期
基金：
国家高技术研究发展计划(863计划);
关键词：
FINITE-ELEMENT SIMULATION; MECHANICAL-PROPERTIES; MATERIAL FLOW; MICROSTRUCTURE; JOINTS; PARAMETERS;
D O I：
10.1016/j.matdes.2008.05.029
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of transverse speed on friction stir welding is analyzed in detail for the controlling of this parameter by using a fully coupled thermo-mechanical model. When the transverse speed is higher, the stirring effect of the welding tool becomes weaker, which is the reason for the occurrence of weld flaw. The material particles on the top surface at the advancing side are transported by the shoulder to the retreating side and piles up on the border of the nugget zone at the retreating side. This is the reason for the formation of weld fash in the friction stir welding process. Friction instead of plastic deformation takes the main contribution to the temperature rise in the friction stir welding process. When the transverse speed is increased, the contribution of the plastic deformation to the temperature rise is increased. But the variation of the transverse speed does not significantly affect the power needed for FSW. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：900 / 907
页数：8
相关论文
共 29 条
[1]   Design of the friction stir welding tool using the continuum based FEM model [J].
Buffa, G ;
Hua, J ;
Shivpuri, R ;
Fratini, L .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 419 (1-2) :381-388
[2]   Effect of welding parameters on mechanical and microstructural properties of AA6082 joints produced by friction stir welding [J].
Cavaliere, P. ;
Squillace, A. ;
Panella, F. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 200 (1-3) :364-372
[3]   Effect of welding parameters on mechanical and micro structural properties of AA6056 joints produced by Friction Stir Welding [J].
Cavaliere, P. ;
Campanile, G. ;
Panella, F. ;
Squillace, A. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 180 (1-3) :263-270
[4]   Development of Trivex friction stir welding tool Part 2 - three-dimensional flow modelling [J].
Colegrove, PA ;
Shercliff, HR .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2004, 9 (04) :352-361
[5]  
Deng X., 2004, Journal of manufacturing processes, V6, P125
[6]   Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy [J].
Elangovan, K. ;
Balasubramanian, V. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 200 (1-3) :163-175
[7]   Flow patterns during friction stir welding [J].
Guerra, A ;
Schmidt, C ;
McClure, JC ;
Murr, LE ;
Nunes, AC .
MATERIALS CHARACTERIZATION, 2002, 49 (02) :95-101
[8]   Effect of zigzag line on the mechanical properties of friction stir welded joints of an Al-Cu alloy [J].
Liu, HJ ;
Chen, YC ;
Feng, JC .
SCRIPTA MATERIALIA, 2006, 55 (03) :231-234
[9]   Parametric studies of friction stir welding by commercial fluid dynamics simulation [J].
Long, T ;
Reynolds, AP .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2006, 11 (02) :200-208
[10]   Effect of friction stir processing on the microstructure of cast A356 aluminum [J].
Ma, Z. Y. ;
Sharma, S. R. ;
Mishra, R. S. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 433 (1-2) :269-278
123