A 3D Meso-Scale Analysis of Angle-Ply Laminates

被引：5

作者：

Zhang, Yunfa ^{[1
]}

Xia, Zihui ^{[2
]}

Ellyin, Fernand ^{[3
]}

机构：

[1] Natl Res Council Canada, Inst Aerosp Res, Ottawa, ON, Canada

[2] Univ Alberta, Dept Mech Engn, Edmonton, AB T6G 2G8, Canada

[3] Univ British Columbia, Dept Mat Engn, Vancouver, BC V5Z 1M9, Canada

来源：

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES | 2013年 / 20卷 / 10期

基金：

加拿大自然科学与工程研究理事会;

关键词：

composites; damage; meso-mechanics; periodic boundary conditions; viscoelasticity; smeared crack method; finite element method; PERIODIC BOUNDARY-CONDITIONS; MICROMECHANICAL ANALYSIS; DEFORMATION-BEHAVIOR; MULTIAXIAL LOADINGS; MATRIX COMPOSITES; REINFORCED METAL; VOLUME ELEMENT; EPOXY-RESIN; PART II; PREDICTIONS;

D O I：

10.1080/15376494.2012.676712

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A 3D two-cell representation of laminates with periodic fiber arrays is established and the corresponding periodic boundary conditions are presented. The matrix is described by a nonlinear viscoelastic material model and the fiber by an elastic one. Matrix cracking is modeled by a smeared crack method. The modeling of material nonlinearity, crack initiation, and growth, with appropriate periodic boundary conditions, are incorporated into a finite element model (FEM). Numerical results for five different angle-ply laminates under tensile loading are presented. The results are found to be in fair agreement with the available test data.

引用

页码：801 / 810

页数：10

共 50 条

[41] 3D meso-scale modeling of reinforcement concrete with high volume fraction of randomly distributed aggregates [J].

Zhang, Jie ;

Wang, Zhiyong ;

Yang, Huawei ;

Wang, Zhihua ;

Shu, Xuefeng .

CONSTRUCTION AND BUILDING MATERIALS, 2018, 164 :350-361

[42] A three-scale domain decomposition method for the 3D analysis of debonding in laminates [J].

Kerfriden, Pierre ;

Allix, O. ;

Gosselet, P. .

COMPUTATIONAL MECHANICS, 2009, 44 (03) :343-362

[43] Numerical Tensile Damage Procedure Analysis of Angle-Ply Laminate Using Multi-Scale RVEs with Smear Crack Models [J].

Wang, Qianwen ;

Zhang, Fa ;

Lu, Zhenqian ;

Cao, Dongfeng ;

Jia, Xiwen .

MATERIALS, 2022, 15 (06)

[44] A twofold strength and toughness criterion for the onset of free-edge shear delamination in angle-ply laminates [J].

Martin, E. ;

Leguillon, D. ;

Carrere, N. .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2010, 47 (09) :1297-1305

[45] MULTISCALE ANALYSIS FOR NEGATIVE THROUGH-THE-THICKNESS POISSON'S RATIO OF ELASTIC-VISCOPLASTIC ANGLE-PLY CFRP LAMINATES [J].

Matsuda, Tetsuya ;

Goto, Keita ;

Ohno, Nobutada ;

Kawasaki, Yusuke ;

Miyashita, Shintaro .

20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,

[46] Experimental testing and 3D meso-scale numerical simulations of SCC subjected to high compression strain rates [J].

Pajak, Malgorzata ;

Baranowski, Pawel ;

Janiszewski, Jacek ;

Kucewicz, Michal ;

Mazurkiewicz, Lukasz ;

Lazniewska-Piekarczyk, Beata .

CONSTRUCTION AND BUILDING MATERIALS, 2021, 302

[47] Generalized scaling of misorientation angle distributions at meso-scale in deformed materials [J].

Gurao, N. P. ;

Suwas, Satyam .

SCIENTIFIC REPORTS, 2014, 4

[48] A 3D three-phase meso-scale model for simulation of chloride diffusion in concrete based on ANSYS [J].

Sun, Jianyuan ;

Xie, Jinbao ;

Zhou, Yong ;

Zhou, Yun .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2022, 219

[49] A practical model to predict the time-dependent behaviour of angle-ply laminates from limited creep data [J].

Miranda Guedes, Rui .

MECHANICS OF TIME-DEPENDENT MATERIALS, 2023, 27 (04) :1043-1067

[50] A three-dimensional Finite Fracture Mechanics model to predict free edge delamination in angle-ply laminates [J].

Burhan, Mohammad ;

Scalici, Tommaso ;

Ullah, Zahur ;

Kazanci, Zafer ;

Catalanotti, Giuseppe .

ENGINEERING FRACTURE MECHANICS, 2024, 306

← 1 2 3 4 5 →