Comparison of Different Winding Schemes of an Asynchronous Machine Driven by a Multi-Functional Converter System

被引：3
|
作者：
Hackner, Thomas [1 ]
Pforr, Johannes [1 ]
机构：
[1] Univ Appl Sci Ingolstadt, Esplanade 10, D-85049 Ingolstadt, Germany
来源：
2010 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION | 2010年
关键词：
Dc Injection Braking; Induction Machine; Integrated Converter; Inverter; MFCS (Multi Functional Converter System); Motor; Neutral Point; Zero-phase Current; Winding Scheme;
D O I：
10.1109/ECCE.2010.5617967
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
A comparison between different winding schemes has been carried out to optimize an asynchronous machine for an automotive electrical power steering system. The machine is driven from a multi-functional converter that consists of an inverter with integrated converter. This integrated converter provides an increased dc-link voltage to the inverter, but forces additional dc currents to flow through the machine windings. A detailed analysis is performed to describe the influence of the dc currents to the behavior of the machine and four most suitable winding schemes have been selected for the investigation. Results of the analysis demonstrate the requirement to carefully select the winding scheme when an asynchronous machine is operated from a multi-functional converter system. FEM simulations verify the results of the analysis. Four machines with different winding schemes have been built and tested together with the multi-functional converter. Experimental results are in close correlation with theoretical predictions.
引用
收藏
页码：570 / 577
页数：8
相关论文
共 50 条
  • [1] Optimization of the Winding Arrangement to Increase the Leakage Inductance of a Synchronous Machine with Multi-Functional Converter Drive
    Hackner, Thomas
    Pforr, Johannes
    2011 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2011, : 1541 - 1548
  • [2] Dynamic and multi-functional labeling schemes
    Dahlgaard, Soren
    Knudsen, Mathias Bak Tejs
    Rotbart, Noy
    Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 2014, 8889 : 141 - 153
  • [3] Assessment of a Multi-Functional Converter System for Traction Electric Drives
    Alosa, C.
    Immovilli, F.
    Lorenzani, E.
    2021 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 2021, : 2696 - 2703
  • [4] Dynamic and Multi-Functional Labeling Schemes
    Dahlgaard, Soren
    Knudsen, Mathias Baek Tejs
    Rotbart, Noy
    ALGORITHMS AND COMPUTATION, ISAAC 2014, 2014, 8889 : 141 - 153
  • [5] Multi-functional machine tool
    Moriwaki, T.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2008, 57 (02) : 736 - 749
  • [6] Current Ripple Reduction in Synchronous Machines driven from Multi-Functional Converter Systems
    Hackner, T.
    Pforr, J.
    PROCEEDINGS OF THE 2011-14TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE 2011), 2011,
  • [7] Combined multi-functional rehabilitation machine
    Zhang, Tianyi
    PROCEEDINGS OF THE 2015 2ND INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS ENGINEERING, CHEMICAL ENGINEERING AND BIOTECHNOLOGY (MMECEB), 2016, 49 : 931 - 934
  • [8] ANALYSIS AND OPERATION OF A PV-BATTERY SYSTEM USING A MULTI-FUNCTIONAL CONVERTER
    Dohler, Jessica S.
    da Rocha, Lorrana F.
    Silva Junior, Dalmo C.
    de Almeida, Pedro M.
    Ferreira, Andre A.
    Oliveira, Janaina G.
    2019 IEEE 15TH BRAZILIAN POWER ELECTRONICS CONFERENCE AND 5TH IEEE SOUTHERN POWER ELECTRONICS CONFERENCE (COBEP/SPEC), 2019,
  • [9] Experimental and machine learning research on a multi-functional Trombe wall system
    Colak, Andac Batur
    Rezaei, Marzieh
    Aydin, Devrim
    Dalkilic, Ahmet Selim
    INTERNATIONAL JOURNAL OF GLOBAL WARMING, 2024, 33 (04) : 404 - 415
  • [10] Brief Announcement: On Dynamic and Multi-functional Labeling Schemes
    Dahlgaard, Soren
    Knudsen, Mathias Baek Tejs
    Rotbart, Noy
    DISTRIBUTED COMPUTING (DISC 2014), 2014, 8784 : 544 - 545
12345