Thermodynamics and thermo-economic analysis of simple combined cycle with inlet fogging

被引：54

作者：

Mahto, D. ^{[1
]}

Pal, Subhasis ^{[2
]}

机构：

[1] Birla Inst Technol, Dept Mech Engn, Ranchi 835217, Jharkhand, India

[2] Hindustan Cables Ltd, Maintenance Dept, Allahabad 211010, Uttar Pradesh, India

来源：

APPLIED THERMAL ENGINEERING | 2013年 / 51卷 / 1-2期

关键词：

Fogging; Hot day; Gas turbine; Heat recovery steam generator; Combined cycle power plant; GAS-TURBINE;

D O I：

10.1016/j.applthermaleng.2012.09.003

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The present study deals with thermodynamic and thermo-economic analysis of simple combined cycle power plant (CCPP), incorporated with gas turbine (GT) blade cooling by means of bleeding of compressed air, and compressor inlet air cooling by means of fogging. This study has been carried out for five configurations, namely, simple gas turbine combined cycle using single pressure heat recovery steam generator (HRSG), that is, (SGTCC1P), simple gas turbine combined cycle using double pressure HRSG (SGTCC2P), simple gas turbine combined cycle using double pressure HRSG with reheat (SGTCC2PR), simple gas turbine combined cycle using triple pressure HRSG (SGTCC3P) and simple gas turbine combined cycle using triple pressure HRSG with reheat (SGTCC3PR), considering the hot day condition(HDC) at ambient temperature of 40 degrees C and relative humidity of 50%. The thermodynamic analysis has shown that SGTCC3P configuration of simple CCPP incur lowest operating cost per kWh power generation as determined in Fig. 19. This is obvious as evident in the Figs. 5, 6 and 9 of the thermodynamic analysis which show that for a given operating range of GTIT and C-pr, SGTCC3P configuration provides highest specific work and efficiency among all configurations. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：413 / 424

页数：12

共 18 条

[1] Augmentation of gas turbine performance using air coolers [J].

Alhazmy, MM ;

Najjar, YSH .

APPLIED THERMAL ENGINEERING, 2004, 24 (2-3) :415-429

[2] Parametric analysis of combined cycles equipped with inlet fogging [J].

Bhargava, R ;

Bianchi, M ;

Melino, F ;

Peretto, A .

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2006, 128 (02) :326-335

[3] EXERGY ANALYSIS OF COMBINED CYCLES .2. ANALYSIS AND OPTIMIZATION OF 2-PRESSURE STEAM BOTTOMING CYCLES [J].

CHIN, WW ;

ELMASRI, MA .

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1987, 109 (02) :237-243

[4]

De Lucia M., 1997, P INT GAS TURB AER C

[5]

De Lucia M., 1995, TURBO EXPO POWER LAN, V78811, pV004T11A005

[6]

El-Masri M.A., 1986, ASME J ENG GAS TURBI, V108

[7] EXERGY ANALYSIS OF COMBINED CYCLES .1. AIR-COOLED BRAYTON-CYCLE GAS-TURBINES [J].

ELMASRI, MA .

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1987, 109 (02) :228-236

[8] Limitations on gas turbine performance imposed by large turbine cooling flows [J].

Horlock, JH ;

Watson, DT ;

Jones, TV .

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2001, 123 (03) :487-494

[9]

Louis J., 1983, P ASME 1983 INT GAS

[10]

Louis J.F., 1994, ASME J ENG GAS TURBI, V106, P750

← 1 2 →