Nanosegregation of ternary Cr-Ni-Fe alloy deposits electrodeposited from a Cr3+-based bath

被引：5

作者：

Huang, Ching An ^{[1
]}

Chen, Chao Yu ^{[1
]}

Mayer, Joachim ^{[2
]}

Weirich, Thomas ^{[2
]}

Iskandar, Riza ^{[2
]}

机构：

[1] Chang Gung Univ, Dept Mech Engn, Tao Yuan, Taiwan

[2] Rhein Westfal TH Aachen, Cent Facil Electron Microscopy, D-52074 Aachen, Germany

来源：

MATERIALS LETTERS | 2013年 / 93卷

关键词：

Electrodeposition; Electron microscopy; Multilayer structure; Microstructure; TRIVALENT CHROMIUM ELECTRODEPOSITION; COATINGS; ELECTROLYTES; BEHAVIOR; ACID;

D O I：

10.1016/j.matlet.2012.11.033

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A laminar structure with nanosized segregation was observed in Cr-Ni-Fe alloy deposits electroplated in a Cr3+-based bath with Ni2+ and Fe2+ ions. The formation of laminar structure could be attributed to the depletion of preferentially reduced ions, or cathodic polarization, adjacent to the cathodic surface. This nanosized segregation could be clearly observed with scanning-transmission-electron microscope in high-angle angular dark-field (HAADF) mode. A crystalline Fe-rich alloy deposit with a grain size of 4 nm can be achieved with an electroplating current density of 15 A dm(-2), whereas an amorphous Cr-rich alloy deposit was produced with 25 A dm(-2). Owing to the approach toward thermal equilibrium in the two-phase field, uphill diffusion took place in the Cr-rich alloy deposit during annealing at 500 degrees C, forming a Cr- and Fe-rich multilayer. (C) 2012 Elsevier B.V. All rights reserved.

引用

页码：107 / 110

页数：4

共 50 条

[41] Prediction of reversible α/γ phase transformation in multi-pass weld of Fe-Cr-Ni ternary alloy by phase-field method
Kim, Dong-Cho
Ogura, Tomo
Hamada, Ryosuke
Yamashita, Shotaro
Saida, Kazuyoshi
JOURNAL OF ADVANCED JOINING PROCESSES, 2021, 4
[42] Stability of Chromia (Cr2O3)-Based Scales Formed During Corrosion of Austenitic Fe-Cr-Ni Alloys in Flowing Oxygenated Supercritical Water
Mahboubi, S.
Jiao, Y.
Cook, W.
Zheng, W.
Guzonas, D. A.
Botton, G. A.
Kish, J. R.
CORROSION, 2016, 72 (09) : 1170 - 1180
[43] Improved oxidation behavior of M-20Cr-20Ta (M: Ni, Fe, Co) ternary alloys by formation of complex Cr-Ta-based oxides
Tang, Chongchong
Schaefer, Bjoern
Schroer, Carsten
Gorr, Bronislava
CORROSION SCIENCE, 2025, 249
[44] Effect of Cr3+- based conversion films on the corrosion behaviour of electrodeposited composite ternary zinc alloys with embedded carbon nanotubes
Peshova, M.
Bachvarov, V.
Vitkova, S.
Boshkov, N.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2020, 98 (02): : 73 - 80
[45] Electrodeposition of Fe-Ni-Cr alloy from Deep Eutectic System containing Choline chloride and Ethylene Glycol
Saravanan, Gengan
Mohan, Subramanian
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2011, 6 (05): : 1468 - 1478
[46] Effect of Cr3C2 Content on Microstructure and Properties of Laser Cladding Layer of Ni3Al-Based Alloy
Kan, Chengling
Peng, Yun
Gong, Karin
Li, Changhai
Zhao, Lin
Tian, Zhiling
RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (10) : 2852 - 2859
[47] Internal carburization and carbide precipitation in Fe-Ni-Cr alloy tubing retired from ethylene pyrolysis service
Chauhan, A.
Anwar, M.
Montero, K.
White, H.
Si, W.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, 2006, 27 (06) : 684 - 690
[48] Early stage SCC initiation analysis of fcc Fe-Cr-Ni ternary alloy at 288 °C: A quantum chemical molecular dynamics approach
Das, Nishith Kumar
Suzuki, Ken
Ogawa, Kazuhiro
Shoji, Tetsuo
CORROSION SCIENCE, 2009, 51 (04) : 908 - 913
[49] Oxidation resistance and microstructure of Ni-Cr-Al-Y-Si coating on Ni3Al based alloy
Han, YF
Xing, ZP
Chaturvedi, MC
Xu, Q
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 240 : 871 - 876
[50] Effect of normal load on two-body abrasive wear of an Fe-B-Cr-C based alloy with minor Cu and Ni additions
Yi, Yanliang
Xing, Jiandong
Lu, Yafang
Gao, Yimin
Fu, Hanguang
Yu, Langlang
Wan, Mingjia
Zheng, Qiaoling
WEAR, 2018, 408 : 160 - 170

← 1 2 3 4 5 →