Hot corrosion phenomena of Nb-Ti-Si based alloy and its silicide coating induced by different corrosive environments at 900 °C

被引：33
作者：
Qiao, Yanqiang [1 ]
Kong, Jianping [1 ]
Guo, Xiping [1 ]
机构：
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Shaanxi, Peoples R China
来源：
CERAMICS INTERNATIONAL | 2018年 / 44卷 / 07期
基金：
中国国家自然科学基金;
关键词：
Silicide coating; Intermetallic; Hot corrosion; Oxidation; ULTRAHIGH-TEMPERATURE ALLOY; PACK CEMENTATION TECHNIQUE; NI-BASED SUPERALLOY; OXIDATION RESISTANCE; SUICIDE COATINGS; NACL DEPOSIT; BEHAVIOR; MICROSTRUCTURE; COMPOSITES; FE;
D O I：
10.1016/j.ceramint.2018.01.238
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
This study aims to elucidate the hot corrosion behavior of Nb-Ti-Si based alloy and its silicide coating in different molten salts at 900 degrees C. The results show that both K2SO4 and Na2SO4 had detrimental effect on the corrosion performance of the alloy, but almost no effect on the coating. However, NaCl accelerated the corrosion process for both the alloy and coating, showing highest scale thickness and mass gain. The main corrosion products consist mainly of Na or K containing oxides, TiO2 and amorphous silicate. The reactivity of the alloy and the coating in different corrosive environments is discussed.
引用
收藏
页码：7978 / 7990
页数：13
相关论文
共 20 条
  • [1] Hot corrosion behavior of silicide coating on an Nb-Ti-Si based ultrahigh temperature alloy
    Qiao, Yanqiang
    Guo, Xiping
    Li, Xuan
    CORROSION SCIENCE, 2015, 91 : 75 - 85
  • [2] Boronizing of the silicide coating on a multicomponent Nb-Ti-Si based alloy as protection against corrosion at high temperatures
    Qiao, Yanqiang
    Kong, Jianping
    Zhou, Rongyi
    Guo, Xiping
    VACUUM, 2019, 161 : 314 - 323
  • [3] Effect of B on hot corrosion behavior of silicide coatings under different corrosive environments at 900 °C
    Chen, Guanghui
    Shao, Wei
    Zhou, Aohan
    Zhang, Yan
    Wu, Yang
    Zhou, Zheng
    Guo, Xingye
    He, Dingyong
    Zhou, Chungen
    SURFACE & COATINGS TECHNOLOGY, 2024, 489
  • [4] Preparation and oxidation resistance of silicide/aluminide composite coatings on an Nb-Ti-Si based alloy
    Zhang, Ping
    Guo, Xiping
    SURFACE & COATINGS TECHNOLOGY, 2015, 274 : 18 - 25
  • [5] Improvement in oxidation resistance of suicide coating on an Nb-Ti-Si based ultrahigh temperature alloy by second aluminizing treatment
    Zhang, Ping
    Guo, Xiping
    CORROSION SCIENCE, 2015, 91 : 101 - 107
  • [6] Effect of Al content on the structure and oxidation resistance of Y and Al modified silicide coatings prepared on Nb-Ti-Si based alloy
    Zhang, Ping
    Guo, Xiping
    CORROSION SCIENCE, 2013, 71 : 10 - 19
  • [7] Improvement of hot deformability of an optimized Nb-Ti-Si based alloy: Twining induced plasticity
    Wang, Qibin
    Wang, Qi
    Chen, Ruirun
    Wang, Xiaowei
    Su, Yanqing
    Fu, Hengzhi
    COMPOSITES COMMUNICATIONS, 2023, 37
  • [8] Y and Al modified silicide coatings on an Nb-Ti-Si based ultrahigh temperature alloy prepared by pack cementation process
    Zhang, Ping
    Guo, Xiping
    SURFACE & COATINGS TECHNOLOGY, 2011, 206 (2-3) : 446 - 454
  • [9] Oxidation and hot corrosion behaviors of Nb-Si based ultrahigh temperature alloys at 900 °C
    He, Jia-hua
    Guo, Xi-ping
    Qiao, Yan-qiang
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (01) : 207 - 221
  • [10] Electrodeposition of Mo/Re duplex layer and preparation of MoSi2/ReSi2/NbSi2 compound coating on Nb-Ti-Si based alloy
    Yue, Gao
    Guo, Xiping
    Qiao, Yanqiang
    Zhou, Chungen
    CORROSION SCIENCE, 2019, 153 : 283 - 291
12