Influence of Al2O3 or ZrO2 particulate addition on the microstructure aspects of AlNi and AlSi alloys

被引:25
作者
Daoud, A [1 ]
Abo-Elkhar, M [1 ]
机构
[1] Cent Met Res & Dev Inst, Non Ferrous Lab, Cairo, Egypt
关键词
thermal diffusivity; aluminum matrix alloys; ceramic particulates; composites;
D O I
10.1016/S0924-0136(01)01067-6
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Different metal/ceramic composites (Al7SiO.3Mg, Al3Ni, Al6Ni, Al9Ni) reinforced with Al2O3 or ZrO2 were prepared by vortex method. Metallographic investigations reveal that in all the composites alpha-Al did not nucleate on the reinforcement particulates. The particulates were generally observed to be located in the last freezing regions regardless of matrix alloy, particulate type or size. The reason for that was the mismatch in the thermal diffusivity between the ceramic particulates and matrix alloys. SEM micrographs show that the presence of the particulates in the AlSi alloy tends to modify the silicon eutectic. In contrast, the addition of the particulates into AlNi alloys did not result in a significant modification of the NiAl3 phase, but it displaced the eutectic point to lower Ni content. (C) 2002 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:296 / 302
页数:7
相关论文
共 50 条
  • [31] Study of Al2O3/ZrO2 (5 nm/20nm) Nanolaminate Composite
    Balakrishnan, G.
    Wasy, A.
    Ho, Ha Sun
    Sudhakara, P.
    Bae, S. I.
    Song, J. I.
    [J]. COMPOSITES RESEARCH, 2013, 26 (01): : 60 - 65
  • [32] Tuning the sapphire EFG process to the growth of Al2O3/YAG/ZrO2:Y eutectic
    Carroz, L.
    Duffar, T.
    [J]. JOURNAL OF CRYSTAL GROWTH, 2018, 489 : 5 - 10
  • [33] Influence of addition of polymeric precursors of ceramics on sintering of Al2O3
    Exner Godoy, Ana Lucia
    Bressiani, Jose Carlos
    de Almeida Bressiani, Ana Helena
    [J]. ADVANCED POWDER TECHNOLOGY VIII, PTS 1 AND 2, 2012, 727-728 : 1092 - 1097
  • [34] Tunnelling cracks in Al2O3/Al2O3-ZrO2 layered composites
    Klopcic, S. Beranic
    Ambrozic, M.
    Kosmac, T.
    Novak, S.
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2007, 27 (2-3) : 1333 - 1337
  • [35] Tailoring the morphology in Y2O3 doped melt-grown Al2O3/ZrO2 eutectic ceramic
    Fu, Liansheng
    Fu, Xuesong
    Chen, Guoqing
    Han, Wen-bo
    Zhou, Wenlong
    [J]. SCRIPTA MATERIALIA, 2017, 129 : 20 - 24
  • [36] Fabrication, microstructure and high-temperature plastic deformation of three-phase Al2O3/Er3Al5O12/ZrO2 sintered ceramics
    Huaman-Mamani, F. A.
    Jimenez-Holgado, C.
    Jimenez-Melendo, M.
    [J]. CERAMICS INTERNATIONAL, 2020, 48 (02) : 2012 - 2020
  • [37] High temperature ductility and cavitation behaviour of hot isostatically pressed (HIP) ZrO2/Al2O3 composite containing 40 wt.% Al2O3
    Tekeli, S
    [J]. CERAMICS INTERNATIONAL, 2003, 29 (02) : 169 - 174
  • [38] The effect of Al2O3 content on the microstructure and properties of Al/ Al2O3 functionally graded material
    Ehsae, M. Reza Ghazizadeh
    Fayyaz, Abdolali
    Tamizifar, Morteza
    Kazemi, Arqavan
    [J]. MATERIALS CHEMISTRY AND PHYSICS, 2024, 320
  • [39] Matrix-filler interactions in polysilazane-derived ceramics with Al2O3 and ZrO2 fillers
    Konegger, Thomas
    Potzmann, Robert
    Puchberger, Michael
    Liersch, Antje
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (15) : 3021 - 3031
  • [40] Micro/Nano Indentation Testing of Spark Plasma Sintered Al2O3 + ZrO2 + cBN Ceramics
    Sedlak, Richard
    Ivor, Michal
    Klimczyk, Piotr
    Wyzga, Piotr
    Podsiadlo, Marcin
    Vojtko, Marek
    Dusza, Jan
    [J]. CERAMICS-SWITZERLAND, 2021, 4 (01): : 40 - 53