Microstructure and mechanical properties of a B4C particle-reinforced Cu matrix composite fabricated by friction stir welding

被引：20

作者：

Ahn, Byung-Wook ^{[1
]}

Kim, Jae-Ha ^{[2
]}

Hamad, Kotiba ^{[1
]}

Jung, Seung-Boo ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Sch Adv Mat Sci & Engn, Suwon 16419, Gyeonggi Do, South Korea

[2] Korea Inst Ind Technol, Adv Funct Mat R&D Grp, Inchon 21999, South Korea

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2017年 / 693卷

关键词：

Friction stir welding; Copper; Boron carbide; Microstructure evolution; Mechanical properties; COPPER;

D O I：

10.1016/j.jallcom.2016.08.304

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The microstructural features and mechanical properties of a B4C particle-reinforced Cu matrix composite prepared by friction stir welding (FSW) were investigated. For this purpose, the FSW process was carried out along a 0.6-mm-width gap, between two Cu plates, filled with boron carbide (B4C) particles. Microstructural observations taken in the stir zone (SZ) revealed that the presence of B4C particles led to the evolution of fine grains (similar to 2 mu m). Based on the hardness measurements of the FSW-fabricated samples, the hardness values were significantly improved after the B4C particles were incorporated. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：688 / 691

页数：4

共 50 条

[31] Effect of friction stir processing with B4C particles on the microstructure and mechanical properties of 6061 aluminum alloy
Yong Zhao
Xiaolu Huang
Qiming Li
Jian Huang
Keng Yan
The International Journal of Advanced Manufacturing Technology, 2015, 78 : 1437 - 1443
[32] Microstructural and Mechanical Properties of Aluminum Matrix Composite Reinforced with Cu-Zn-Al Particles Fabricated by Friction Stir Processing
Li Yang
Kai Jian Lu
Zheng Liu
Yao Cheng Zhang
Yu Hang Xu
Feng Xu
Hui Ming Gao
Transactions of the Indian Institute of Metals, 2022, 75 : 1471 - 1479
[33] Effect of Traverse Speed on Microstructure and Microhardness of Cu/B4C Surface Composite Produced by Friction Stir Processing
R. Sathiskumar
N. Murugan
I. Dinaharan
S. J. Vijay
Transactions of the Indian Institute of Metals, 2013, 66 : 333 - 337
[34] Effect of Addition of B4C on Microstructure and Mechanical Properties of Ti Matrix Composite Reinforced with In situ Hybrid TiB + TiC Reinforcements Fabricated by Pressureless Sintering
Alireza Zibanejad-Rad
Ali Alizadeh
Seyyed Mehdi Abbasi
Transactions of the Indian Institute of Metals, 2023, 76 : 1761 - 1770
[35] Microstructure analysis of amorphous reinforced aluminum matrix composite prepared by friction stir welding
Liu, Peng
Shi, Qingyu
Huo, Yushuang
Zhang, Yuanbin
Li, Yang
Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (11): : 53 - 56
[36] STUDY ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FRICTION STIR WELDING JOINTS OF IN-SITU Al3Zr/AA6082 PARTICLE-REINFORCED ALUMINUM MATRIX COMPOSITES
Hui, Li
Sun Caizhi
Feng, Wang
Qiao Yuanpeng
Li Chuying
Xu Pinyi
Andrii, Zatulovskiy
Volodymyr, Shcheretskyi
ARCHIVES OF METALLURGY AND MATERIALS, 2023, 68 (03) : 907 - 919
[37] Mechanical and microstructural properties of TiC particle-reinforced titanium matrix composite
Song, W. D.
Ning, J. G.
Mao, X. N.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2011, 42 (3-4): : 183 - 194
[38] Influence of heat treatment on the microstructure, mechanical and tribological performances of particle reinforced aluminum matrix surface composite fabricated through friction stir processing
Girish, G.
Anandakrishnan, V
PARTICULATE SCIENCE AND TECHNOLOGY, 2022, 40 (08) : 942 - 957
[39] Microstructure and mechanical properties of Cu/RHA composites fabricated by friction stir processing
Saravanakumar, S.
Gopalakrishnan, S.
Kalaiselvan, K.
Prakash, K. B.
MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 879 - 883
[40] Microstructure, mechanical, and cutting performance properties of B4C and SiC reinforced sandwich composite segments
Islak, Serkan
Celik, Ertugrul
Erol, Mumtaz
Houssain, Hasaneen
CERAMICS INTERNATIONAL, 2024, 50 (21) : 43530 - 43541

← 1 2 3 4 5 →