Investigation of the thermoelectrical properties of the Sn91.2-x-Zn8.8-Agx alloys

被引:9
作者
Sahin, M. [1 ]
Cadirli, E. [2 ]
Bayram, U. [3 ]
Esener, P. Ata [4 ]
机构
[1] Nigde Omer Halisdemir Univ, Tech Vocat Sch Sci, Dept Elect & Automat, Nigde, Turkey
[2] Nigde Omer Halisdemir Univ, Fac Arts & Sci, Dept Phys, Nigde, Turkey
[3] Erciyes Univ, Dept Phys, Fac Sci, Kayseri, Turkey
[4] Nevsehir Haci Bektas Veli Univ, Fac Engn & Architecture, Dept Met & Mat Engn, Nevsehir, Turkey
关键词
Directional solidification; Electrical resistivity; Thermal conductivity; Enthalpy; Specific heat; LEAD-FREE SOLDER; CRUCIBLE DIRECTIONAL SOLIDIFICATION; MECHANICAL-PROPERTIES; MICROSTRUCTURE EVOLUTION; THERMAL-BEHAVIOR; AG; CU; RELIABILITY; ALUMINUM; JOINTS;
D O I
10.1007/s10973-017-6939-3
中图分类号
O414.1 [热力学];
学科分类号
摘要
Sn91.2-x-Zn-8.8-Ag-x alloys (x = 0.15-10.0 wt%) were directionally solidified upwards at a constant G (4.16 K mm(-1)) and V (41.5 mu m s(-1)) in a Bridgman-type directional solidification furnace. The electrical resistivity (rho) measurements of the alloys depending on the temperature were performed using the standard four-point probe method, and the temperature coefficients of the resistivities (alpha) were calculated. Composition analyses of the alloys were carried out using energy-dispersive X-ray spectroscopy. The enthalpy (a dagger H) and the specific heat (a dagger C (p)) values of the alloys were determined by differential scanning calorimetry analysis. The thermal conductivity (K) values were obtained from the Wiedemann-Franz equation. According to the experimental results, electrical resistivities increased up to 3.0 mass% Ag and decreased with further increase in Ag content. Enthalpy and specific heat values decreased with the increasing content of Ag. The results were compared with the previous works for Sn-Zn-Ag alloys.
引用
收藏
页码:317 / 325
页数:9
相关论文
共 35 条
[1]   Influence of Ag micro-particle additions on the microstructure, hardness and tensile properties of Sn-9Zn binary eutectic solder alloy [J].
Ahmed, Mansur ;
Fouzder, Tama ;
Sharif, A. ;
Gain, Asit Kumar ;
Chan, Y. C. .
MICROELECTRONICS RELIABILITY, 2010, 50 (08) :1134-1141
[2]   Development of high strength Sn-Cu solder using copper particles at nanolength scale [J].
Alam, M. E. ;
Nai, S. M. L. ;
Gupta, M. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 476 (1-2) :199-206
[3]   Characterization of low speed shear test reliability of Sn-1.0Ag-XCe/ENEPIG solder joint [J].
Bui, Q. V. ;
Jung, S. B. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 560 :54-61
[4]   Thermal characteristics and intermetallic compounds formed at Sn-9Zn-0.5Ag/Cu interface [J].
Chang, TC ;
Hon, MH ;
Wang, MC .
MATERIALS TRANSACTIONS, 2004, 45 (03) :606-613
[5]   Characterization of IMC layer and its effect on thermomechanical fatigue life of Sn-3.8Ag-0.7Cu solder joints [J].
Che, F. X. ;
Pang, John H. L. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 541 :6-13
[6]   Effects of Ag on Properties of Sn-9Zn Lead-Free Solder [J].
Chen Wenxue ;
Xue Songbai ;
Wang Hui ;
Hu Yuhua .
RARE METAL MATERIALS AND ENGINEERING, 2010, 39 (10) :1702-1705
[7]   Structural and electrical studies of Cu-doped CdO prepared by solid state reaction [J].
Colak, Hakan ;
Turkoglu, Orhan .
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2013, 16 (03) :712-717
[8]   Microstructure control and mechanical properties of Ti44Al6Nb1.0Cr2.0V alloy by cold crucible directional solidification [J].
Dong, Shulin ;
Chen, Ruirun ;
Guo, Jingjie ;
Ding, Hongsheng ;
Su, Yanqing ;
Fu, Hengzhi .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 614 :67-74
[9]   Elastic properties and thermal behavior of Sn-Zn based lead-free solder alloys [J].
El-Daly, A. A. ;
Hammad, A. E. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 505 (02) :793-800
[10]   Effects of small addition of Ag and/or Cu on the microstructure and properties of Sn-9Zn lead-free solders [J].
El-Daly, A. A. ;
Hammad, A. E. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (20) :5212-5219