Investigation of the impact of transient heat loads applied by laser irradiation on ITER-grade tungsten

被引:79
作者
Huber, A. [1 ]
Arakcheev, A. [2 ]
Sergienko, G. [1 ]
Steudel, I. [1 ]
Wirtz, M. [1 ]
Burdakov, A. V. [2 ]
Coenen, J. W. [1 ]
Kreter, A. [1 ]
Linke, J. [1 ]
Mertens, Ph [1 ]
Philipps, V. [1 ]
Pintsuk, G. [1 ]
Reinhart, M. [1 ]
Samm, U. [1 ]
Shoshin, A. [2 ]
Schweer, B. [1 ]
Unterberg, B. [1 ]
Zlobinski, M. [1 ]
机构
[1] Forschungszentrum Julich, EURATOM Assoc, Inst Energy & Climate Res, Trilateral Euregio Cluster, D-52425 Julich, Germany
[2] Budker Inst Nucl Phys, Novosibirsk 630090, Russia
关键词
divertor material; tungsten; ELM; laser; thermal shock;
D O I
10.1088/0031-8949/2014/T159/014005
中图分类号
O4 [物理学];
学科分类号
0702 ;
摘要
Cracking thresholds and crack patterns in tungsten targets after repetitive ITER-like edge localized mode (ELM) pulses have been studied in recent simulation experiments by laser irradiation. The tungsten specimens were tested under selected conditions to quantify the thermal shock response. A Nd:YAG laser capable of delivering up to 32 J of energy per pulse with a duration of 1 ms at the fundamental wavelength lambda = 1064 nm has been used to irradiate ITER-grade tungsten samples with repetitive heat loads. The laser exposures were performed for targets at room temperature (RT) as well as for targets preheated to 400 degrees C to measure the effects of the ELM-like loading conditions on the formation and development of cracks. The magnitude of the heat loads was 0.19, 0.38, 0.76 and 0.90 MJ m(-2) (below the melting threshold) with a pulse duration of 1 ms. The tungsten surface was analysed after 100 and 1000 laser pulses to investigate the influence of material modification by plasma exposures on the cracking threshold. The observed damage threshold for ITER-grade W lies between 0.38 and 0.76 GW m(-2). Continued cycling up to 1000 pulses at RT results in enhanced erosion of crack edges and crack edge melting. At the base temperature of 400 degrees C, the formation of cracks is suppressed.
引用
收藏
页数:5
相关论文
共 10 条
[1]   Plasma heating and confinement in GOL-3 multi mirror trap [J].
Burdakov, A. ;
Azhannikov, A. ;
Astrelin, V. ;
Beklemishev, A. ;
Burmasov, V. ;
Derevyankin, G. ;
Ivanenko, V. ;
Ivanov, I. ;
Ivantsivsky, M. ;
Kandaurov, I. ;
Konyukhov, V. ;
Kotelnikov, I. ;
Kovenya, V. ;
Kozlinskaya, T. ;
Kuklin, K. ;
Kuznetsov, A. ;
Kuznetsov, S. ;
Lotov, K. ;
Timofeev, I. ;
Makarov, A. ;
Mekler, K. ;
Nikolaev, V. ;
Popov, S. ;
Postupaev, V. ;
Polosatkin, S. ;
Rovenskikh, A. ;
Shoshin, A. ;
Shvab, I. ;
Sinitsky, S. ;
Sulyaev, Yu. ;
Stepanov, V. ;
Trunyov, Yu. ;
Vyacheslavov, L. ;
Zhukov, V. ;
Zubairov, Ed. .
FUSION SCIENCE AND TECHNOLOGY, 2007, 51 (2T) :106-111
[2]   Assessment of tungsten for use in the ITER plasma facing components [J].
Davis, JW ;
Barabash, VR ;
Makhankov, A ;
Plochl, L ;
Slattery, KT .
JOURNAL OF NUCLEAR MATERIALS, 1998, 258 :308-312
[3]  
Duwe R, 1995, SOFT 1994 P 18 S FUS, P355
[4]   The latest results from ELM-simulation experiments in plasma accelerators [J].
Garkusha, I. E. ;
Arkhipov, N. I. ;
Klimov, N. S. ;
Makhlaj, V. A. ;
Safronov, V. M. ;
Landman, I. ;
Tereshin, V. I. .
PHYSICA SCRIPTA, 2009, T138
[5]   INVESTIGATION OF THE IMPACT ON TUNGSTEN OF TRANSIENT HEAT LOADS INDUCED BY LASER IRRADIATION, ELECTRON BEAMS AND PLASMA GUNS [J].
Huber, A. ;
Burdakov, A. ;
Zlobinski, M. ;
Wirtz, M. ;
Coenen, J. W. ;
Linke, J. ;
Mertens, Ph ;
Philipps, V. ;
Pintsuk, G. ;
Schweer, B. ;
Sergienko, G. ;
Shoshin, A. ;
Samm, U. ;
Unterberg, B. .
FUSION SCIENCE AND TECHNOLOGY, 2013, 63 (1T) :197-200
[6]   Transient heat loads in current fusion experiments, extrapolation to ITER and consequences for its operation [J].
Loarte, A. ;
Saibene, G. ;
Sartori, R. ;
Riccardo, V. ;
Andrew, P. ;
Paley, J. ;
Fundamenski, W. ;
Eich, T. ;
Herrmann, A. ;
Pautasso, G. ;
Kirk, A. ;
Counsell, G. ;
Federici, G. ;
Strohmayer, G. ;
Whyte, D. ;
Leonard, A. ;
Pitts, R. A. ;
Landman, I. ;
Bazylev, B. ;
Pestchanyi, S. .
PHYSICA SCRIPTA, 2007, T128 :222-228
[7]   Tungsten and CFC degradation under combined high cycle transient and steady state heat loads [J].
Loewenhoff, Th. ;
Linke, J. ;
Pintsuk, G. ;
Thomser, C. .
FUSION ENGINEERING AND DESIGN, 2012, 87 (7-8) :1201-1205
[8]   Timescale and magnitude of plasma thermal energy loss before and during disruptions in JET [J].
Riccardo, V ;
Loarte, A .
NUCLEAR FUSION, 2005, 45 (11) :1427-1438
[9]   Comparison of thermal shock damages induced by different simulation methods on tungsten [J].
Wirtz, M. ;
Linke, J. ;
Pintsuk, G. ;
Singheiser, L. ;
Zlobinski, M. .
JOURNAL OF NUCLEAR MATERIALS, 2013, 438 :S833-S836
[10]   Comparison of the thermal shock performance of different tungsten grades and the influence of microstructure on the damage behaviour [J].
Wirtz, M. ;
Linke, J. ;
Pintsuk, G. ;
Singheiser, L. ;
Uytdenhouwen, I. .
PHYSICA SCRIPTA, 2011, T145