The Study of Mechanical Behaviour of Materials for the Nuclear Reactor Components in SUSEN Hot Cells

被引：0

作者：

Zimina, Mariia ^{[1
]}

Svrcula, Petr ^{[1
]}

Zhanal, Pavel ^{[1
]}

Libera, Ondrej ^{[1
]}

Zaunschirm, Stefan ^{[2
]}

Srba, Ondrej ^{[1
]}

机构：

[1] Res Ctr Rez Ltd, Hlavni 130, Husinec Rez 25068, Czech Republic

[2] Univ Appl Sci Upper Austria, Stelzhamerstr 23, A-4600 Wels, Austria

来源：

TMS 2019 148TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS | 2019年

关键词：

Hot cells; Irradiated materials; Nuclear power plants; STRESS-CORROSION CRACKING; PRESSURE-VESSEL; STEELS;

D O I：

10.1007/978-3-030-05861-6_126

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work is dedicated to the mechanical testing of the materials used for the nuclear plants applications in the hot cells facility built in Czech Republic. The variety of mechanical tests performed in the Research Center Rez, Ltd., is described. Namely, an experimentalwork on the irradiated A533 pressure vessel steel and mechanical behavior of Cr-Ni-Ti steel in the corrosive environment at elevated temperatures are presented. The evolution of the hot cells from the construction to the active mechanical testing of the irradiated materials is described.

引用

页码：1325 / 1333

页数：9

共 12 条

[1] Andresen PL, 2012, IRRADIATION ASSISTED, V5
[2] Ehrnstén U, 2012, COMPREHENSIVE NUCLEAR MATERIALS, VOL 5: MATERIAL PERFORMANCE AND CORROSION/WASTE MATERIALS, P93
[3] IAEA, 2007, 1544 IAEA TECD
[4] Ferritic/martensitic steels for next-generation reactors
Klueh, R. L.
Nelson, A. T.
[J]. JOURNAL OF NUCLEAR MATERIALS, 2007, 371 (1-3) : 37 - 52
[5] X-ray microtomography
Landis, Eric N.
Keane, Denis T.
[J]. MATERIALS CHARACTERIZATION, 2010, 61 (12) : 1305 - 1316
[6] The beneficial effect of surface carbon coating on stress corrosion cracking of Type 304 austenitic stainless steels in high temperature water
Mukahiwa, K.
Bertali, G.
Burke, M. G.
Duff, J.
Scenini, F.
[J]. SCRIPTA MATERIALIA, 2019, 158 : 77 - 82
[7] Application of X-ray microtomography to analysis of cavitation in AZ61 magnesium alloy during hot deformation
Rashed, H. M. M. A.
Robson, J. D.
Bate, P. S.
Davis, B.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2610 - 2619
[8] Allosteric Regulation of Nucleotidyl Cyclases: An Emerging Pharmacological Target
Seifert, Roland
Beste, Kerstin Y.
[J]. SCIENCE SIGNALING, 2012, 5 (240)
[9] 3D analysis of macrosegregation in twin-roll cast AA3003 alloy
Slapakova, Michaela
Zimina, Mariia
Zaunschirm, Stefan
Kastner, Johann
Bajer, Jan
Cieslar, Miroslav
[J]. MATERIALS CHARACTERIZATION, 2016, 118 : 44 - 49
[10] STRESS-CORROSION CRACKING OF NUCLEAR-REACTOR PRESSURE-VESSEL AND PIPING STEELS
SPEIDEL, MO
MAGDOWSKI, RM
[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1988, 34 (1-5) : 119 - 142

← 1 2 →