Large-Scale Numerical Modeling in Geotechnical Earthquake Engineering

Calibration, on the basis of data from centrifuge and shake table experiments, continues to promote the development of more accurate computational models. Capabilities such as coupled solid-fluid formulations and nonlinear incremental-plasticity approaches allow for more realistic representations of the involved static and dynamic/seismic responses. In addition, contemporary high-performance parallel computing environments are permitting new insights, gained from analyses of entire ground-foundation-structural systems. On this basis, the horizon is expanding for large-scale numerical simulations to further contribute toward the evolution of more accurate analysis and design strategies. The studies presented in this paper address this issue through recently conducted three-dimensional (3D) representative research efforts that simulate the seismic response of (1) a shallow-foundation liquefaction countermeasure, (2) a pile-supported wharf, and (3) a full bridge-ground system. A discussion of enabling tools for routine usage of such 3D simulation environments is also presented, as an important element in support of wider adoption and practical applications. In this regard, graphical user interfaces and visualization approaches can play a critical role. (C) 2011 American Society of Civil Engineers.