Microstructures and mechanical properties of laminated ZrC-SiC composites with different SiC powders

被引:6
|
作者
Li, Yuanyuan [1 ]
Li, Qinggang [1 ,2 ]
Wang, Zhi [1 ]
机构
[1] Univ Jinan, Sch Mat Sci & Engn, Jinan 250022, Peoples R China
[2] Shandong Prov Key Lab Preparat & Measurement Bldg, Jinan 250022, Peoples R China
基金
中国国家自然科学基金;
关键词
Layered structures; Structural composites; Mechanical properties; Scanning electron microscopy (SEM); Heat treatment; FABRICATION; CERAMICS; BEHAVIOR; SI3N4;
D O I
10.1016/j.ceramint.2015.07.204
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Laminated ZrC-SiC composites with different SiC powders were prepared through tape casting and hot pressing. Two different SiC powders, with sizes of 10 mu m and 800 nm, were introduced into the laminated ZrC-SiC composite. The results show that there are obvious crack deflection and prolonged crack length in the laminated structure. Moreover, the composite B with a mean SiC particle size of 800 nm is more compact than composite A (with mean SiC particle size of 10 pm). The Si elements in composite A and composite B are pressed into the ZrC layer; fewer Zr elements spread to the SiC layer. The diffusion of Si elements of the SiC(2) (SiC particle size of 800 nm) layer is easier and more uniform. Moreover, composite B has a higher density, lower porosity, and higher flexural strength than composite A. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码:15255 / 15260
页数:6
相关论文
共 50 条
  • [21] Improving the sinterability of ZrC-SiC composite powders by Mg addition
    Zheng, Lei
    Zhang, Mingyu
    He, Kejian
    Fang, Cunqian
    Zeng, Chen
    Huang, Qizhong
    CERAMICS INTERNATIONAL, 2021, 47 (13) : 18330 - 18338
  • [22] Surface Optimization of ZrC-SiC Inner Layer to Enhance Ablation Property of SiC/ZrC-SiC Multi-Layer Coating for C/C Composites
    Shi, Anhong
    Yang, Xin
    Fang, Cunqian
    Weng, Yuanqi
    Luo, Xiao
    Zhang, Ze
    Huang, Qizhong
    COATINGS, 2021, 11 (04)
  • [23] Effect of ZrC-SiC content on microstructure and ablation properties of C/C composites
    Li, Jun
    Yang, Xin
    Su, Zhe-an
    Xue, Liang
    Zhong, Ping
    Li, Shuai-peng
    Huang, Qi-zhong
    Liu, Hong-wei
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (10) : 2653 - 2664
  • [24] In situ reactive fabrication of ZrC-SiC coating on C-f/ZrC-SiC composite
    Li, Qinggang
    Wang, Zhi
    Shi, Guopu
    Gong, Lifei
    JOURNAL OF ASIAN CERAMIC SOCIETIES, 2015, 3 (02): : 178 - 182
  • [25] Fabrication and properties of PIP 3D Cf/ZrC-SiC composites
    Yan, Chunlei
    Liu, Rongjun
    Cao, Yingbin
    Zhang, Changrui
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 591 : 105 - 110
  • [26] Mechanical properties and microstructure of Cf/ZrC-SiC and Cf/SiC composites produced by precursor infiltration and pyrolysis combined with gaseous silicon infiltration
    Yan, Chunlei
    Li, Yaoqiang
    Cheng, Hao
    Wu, Zaoming
    Liu, Fangming
    Liu, Rongjun
    Journal of Alloys and Compounds, 2022, 908
  • [27] Mechanical properties and microstructure of Cf/ZrC-SiC and Cf/SiC composites produced by precursor infiltration and pyrolysis combined with gaseous silicon infiltration
    Yan, Chunlei
    Li, Yaoqiang
    Cheng, Hao
    Wu, Zaoming
    Liu, Fangming
    Liu, Rongjun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 908
  • [28] Effect of SiC/ZrC ratio on the mechanical and ablation properties of C/C-SiC-ZrC composites
    Feng, Bo
    Li, Hejun
    Zhang, Yulei
    Liu, Lei
    Yan, Min
    Corrosion Science, 2014, 82 : 27 - 35
  • [29] Effect of SiC/ZrC ratio on the mechanical and ablation properties of C/C-SiC-ZrC composites
    Feng, Bo
    Li, Hejun
    Zhang, Yulei
    Liu, Lei
    Yan, Min
    Corrosion Science, 2014, 82 : 27 - 35
  • [30] Effect of SiC/ZrC ratio on the mechanical and ablation properties of C/C-SiC-ZrC composites
    Feng, Bo
    Li, Hejun
    Zhang, Yulei
    Liu, Lei
    Yan, Min
    CORROSION SCIENCE, 2014, 82 : 27 - 35