Slot Grinding of Advanced Ceramics with Brazed Diamond Cut-off Wheels

被引：0

作者：

Chen, Mei ^{[1
]}

Zhang, Feng ^{[1
]}

Shen, Jianyun ^{[1
]}

Guo, Hua ^{[1
]}

Xu, Xipeng ^{[1
]}

机构：

[1] Huaqiao Univ, MOE Engn Res Ctr Brittle Mat Machining, Xiamen 361021, Peoples R China

来源：

APPLICATION OF DIAMOND AND RELATED MATERIALS | 2011年 / 175卷

关键词：

Slot grinding; Brazing; Diamond; Cut-off wheel; Advanced ceramic;

D O I：

10.4028/www.scientific.net/SSP.175.52

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Based on the analysis of problems of diamond cut-off wheels used in slot grinding of ceramics at present, a brazed diamond cut-off wheel was produced and analyzed. Two typical advanced ceramics, alumina and silicon nitride, were used as the workpiece materials. In the experiments of slot grinding of ceramics, grinding ratio, wear process of the wheel and grinding quality of the work were studied. Experimental results showed that the brazed diamond cut-off wheel obtained good grinding ratio and abrasive resistance. The surface roughness of ground silicon nitride was better than that of alumina.

引用

页码：52 / 57

页数：6

共 10 条

[1] Hwang TW, 2000, CIRP ANNALS 2000: MANUFACTURING TECHNOLOGY, P245
[2] Inasaki I., 1993, Annals Cirp, V36, P463, DOI DOI 10.1016/S0007-8506(07)60748-3
[3] Juchem HO, 1997, IND DIAMOND REV, V57, P114
[4] Wear mechanisms of diamond abrasives during transition and steady stages in creep-feed grinding of structural ceramics
Liao, TW
Li, K
McSpadden, SB
[J]. WEAR, 2000, 242 (1-2) : 28 - 37
[5] Malkin S., 1989, Theory and application of machining with abrasives, Grinding Technology
[6] MALKIN S, 1996, ANN CIRP, V45, P569
[7] Force and energy characteristics in grinding of ceramics
Shen, JY
Li, Y
Xu, XP
Gao, Y
[J]. ADVANCES IN ABRASIVE TECHNOLOGY V, 2003, 238-2 : 105 - 110
[8] WARNECKE G, 1995, IND DIAMOND REV, V55, P126
[9] Ceramic response to high speed grinding
Yin, L
Huang, H
[J]. MACHINING SCIENCE AND TECHNOLOGY, 2004, 8 (01) : 21 - 37
[10] Zhang B., 1994, CIRP ANN-MANUF TECHN, V43, P305, DOI [10.1016/S0007-8506(07)62219-7, DOI 10.1016/S0007-8506(07)62219-7]

← 1 →