Multilevel Manchester (2 bits/symbol) coding with optical equaliser for increasing the transmission distance of high-speed fibre optic links

被引:0
|
作者
Oluwajobi, Festus Idowu [1 ,2 ]
Nguyen, Dong-Nhat [3 ]
Khan, Nafizah [1 ,2 ]
Malekmohammadi, Amin [4 ]
机构
[1] George Green Inst Electromagnet Res, Appl Elect & Telecommu Res Grp, Nottingham, England
[2] Univ Nottingham, Dept Elect & Elect Engn, Malaysia Campus UNMC,Jalan Broga, Semeniyh 43500, Selangor, Malaysia
[3] Czech Tech Univ, Fac Elect Engn, Tech 2, Prague 16627, Czech Republic
[4] Calif Polytech State Univ San Luis Obispo, Dept Elect Engn, San Luis Obispo, CA 93407 USA
关键词
optical fibre dispersion; error statistics; optical links; equalisers; optical fibre networks; multilevel Manchester coding; high-speed fibre optic links; four-level Manchester coding; four-level modified Manchester technique; second-order optical equaliser; standard single-mode fibre; transmission distance; fibre dispersion; BER performance; high-speed optical transmission links; bit error rate; power penalty; eye diagrams; dispersion tolerance; bit rate 20 Gbit; s; bit rate 40 Gbit; distance; 27; 0; km; 25; 6; 5; 7; MODULATION FORMATS; SIGNAL; PERFORMANCE; DISTORTION; ABSOLUTE;
D O I
10.1049/iet-opt.2019.0130
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This study accessed the performance of the four-level Manchester coding (4-MC) and four-level modified Manchester (4-MM) technique at the bit rates of 20 and 40 Gb/s for the first-order and second-order optical equalisers. The performances were evaluated with respect to bit error rate (BER), power penalty, eye diagrams, and dispersion tolerance. Based on the results by utilising the second-order optical equaliser, at 20 Gb/s, the transmission distance of 4-MC and 4-MM was extended by 25 and 27 km of standard single-mode fibre (SSMF), respectively, while at the bit rate of 40 Gb/s, the 4-MC and 4-MM transmission distance was extended by 6.5 and 7.5 km of SSMF, respectively. Hence, the second-order optical equaliser can adequately compensate for the fibre dispersion and consequently the overall BER performance. Therefore, the proposed system could serve as an alternative to the next-generation high-speed optical transmission links.
引用
收藏
页码:182 / 188
页数:7
相关论文
共 44 条
  • [41] Simulation for Optical Response of High-Speed Traveling Wave Electro-Optic Polymer/TiO2 Multilayer Slot Waveguide Modulators
    Zhang, Dan
    Enami, Yasufumi
    IEEE PHOTONICS JOURNAL, 2017, 9 (03):
  • [42] High-speed bi-directional polarisation division multiplexed optical transmission in ultra low-loss (1.3 dB/km) polarisation-maintaining photonic crystal fibre
    Suzuki, K
    Kubota, H
    Kawanishi, S
    Tanaka, M
    Fujita, M
    ELECTRONICS LETTERS, 2001, 37 (23) : 1399 - 1401
  • [43] Rigorous study of low-complexity adaptive space-time block-coded MIMO receivers in high-speed mode multiplexed fiber-optic transmission links using few-mode fibers
    Weng, Yi
    He, Xuan
    Wang, Junyi
    Pan, Zhongqi
    NEXT-GENERATION OPTICAL COMMUNICATION: COMPONENTS, SUB-SYSTEMS, AND SYSTEMS VI, 2017, 10130
  • [44] An optical model of a transmission-type vertical-cavity electro-absorption modulator on Si/SiO2 for high-speed intra/inter-chip interconnects
    Baghdasaryan, Hovik V.
    Knyazyan, Tamara M.
    Berberyan, Ara S.
    Hovhannisyan, Tamara T.
    Marciniak, Marian
    ICTON 2008: PROCEEDINGS OF 2008 10TH ANNIVERSARY INTERNATIONAL CONFERENCE ON TRANSPARENT OPTICAL NETWORKS, VOL 2, 2008, : 174 - +