FINITE ELEMENT SIMULATION OF CUTTING FORCES IN TURNING Ti6Al4V USING DEFORM 3D

Titanium alloys are widely used in aerospace industry due to their excellent mechanical properties though they are classified as difficult to machine materials. As the experimental tests are costly and time demanding, metal cutting modeling provides an alternative way for better understanding of machining processes under different cutting conditions. In the present work, a finite element modeling software, DEFORM 3D has been used to simulate the machining of titanium alloy Ti6Al4V to predict the cutting forces. Experiments were conducted on a precision lathe machine using Ti6Al4V as workpiece material and TiAlN coated inserts as cutting tool. L9 orthogonal array based on design of experiments was used to evaluate the effect of process parameters such as cutting speed and feed with a constant depth of cut 0.25 mm and also the tool geometry such as rake angle on cutting force and temperature. These results were then used for estimation of heat transfer coefficient and shear friction factor constant, which are used as boundary conditions in the process of simulation. Upon simulations a relative error of maximum 9.07% was observed when compared with experimental results. A methodology was adopted to standardize these constants for a given process by taking average values of shear friction factor and heat transfer coefficient, which are used for further simulations within the range of parameters used during experimentation. A maximum error of 9.94% was observed when these simulation results are compared with that of experimental results.