Over the last few years our practice has been responsible for the structural design of a number of lightweight structures that achieve their structural stability by inflating elements of fabric structure. The paper will explain the design rationale of key examples; describing the structural forms, methods of analysis and design, and the detailing, materials, and methods of fabrication. The largest and most complex of these structures to date is a demountable stage set structure for the Cirque du Soleil "Toruk: First Flight" show, comprising two 15 metre high and 20 metre wide structures. The stage set structures form 'trees' on which acrobats climb and perform. Each structure incorporates a high level access gantry with acrobat suspension and counterweight systems, as well as a secondary inflatable skin cladding. The entire primary structure and cladding system is constructed from inflated fabric elements using internal pressures ranging from 0.5 KN/ m2 up to 90 KN/ m2, and are deflated down to less than 5% of their erected volume for transport between venues. Other examples of our work described will include temporary pavilions with clear spans of up to 25 metres, using a combination of air tight and air permeable elements. Also a range of wide span structures that we describe as "semi-permanent" that are capable of resisting full environmental wind and snow loading, and that are fully demountable but that can also be erected for extended periods of time in a single location Crown Copyright (C) 2016 Published by Elsevier Ltd.
