Determination of the crack-tip toughness in silicon nitride ceramics

被引：14

作者：

Fuenfschilling, S. ^{[1
]}

Fett, T. ^{[1
]}

Hoffmann, M. J. ^{[1
]}

Oberacker, R. ^{[1
]}

Jelitto, H. ^{[2
]}

Schneider, G. A. ^{[2
]}

机构：

[1] Univ Karlsruhe, Inst Keram Maschinenbau, Karlsruhe, Germany

[2] Tech Univ Hamburg, Inst Keram Hochleistungswerkstoffe, Hamburg, Germany

来源：

JOURNAL OF MATERIALS SCIENCE | 2009年 / 44卷 / 01期

关键词：

Stress Intensity Factor; Y2O3; Silicon Nitride; Notch Root Radius; Silicon Nitride Ceramic;

D O I：

10.1007/s10853-008-3136-6

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Crack-opening displacements (COD) method was used to measure crack-tip toughness in silicon nitride Si3N4 ceramics containing (Y2O3,MgO) and (Y2O3, Al2O3). The R-curves for these materials were measured in a very stiff test device and four-point bending tests were carried out on notched bars of dimensions. Results for the first microns of crack propagation show that the R-curves raise very steeply reaching saturation already after a few μm crack extension. The semi-elliptical crack shape of Vickers cracks are found to develop in the unloading phase, characterized by the condition of crack-tip toughness at the crack tip after load removal. The crack-tip toughness for (Y2O3,MgO) is 2.33MPa√m and 2.033MPa√m for (Y2O3, Al2O3).

引用

页码：335 / 338

页数：4

共 50 条

[1] Determination of the crack-tip toughness in silicon nitride ceramics
S. Fünfschilling
T. Fett
M. J. Hoffmann
R. Oberacker
H. Jelitto
G. A. Schneider
Journal of Materials Science, 2009, 44 : 335 - 338
[2] Influence of microcracking on crack-tip toughness of alumina
Njiwa, ABK
Yousef, SG
Fett, T
Rödel, J
ENGINEERING FRACTURE MECHANICS, 2005, 72 (07) : 1011 - 1019
[3] Reinforcement by crack-tip blunting in porous ceramics
Deng, ZY
She, JH
Inagaki, Y
Yang, JF
Ohji, T
Tanaka, Y
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2004, 24 (07) : 2055 - 2059
[4] CRACK-TIP MICROCRACK ZONE FORMATION IN CERAMICS
FU, Y
EVANS, AG
AMERICAN CERAMIC SOCIETY BULLETIN, 1981, 60 (09): : 922 - 922
[5] Crack-tip toughness of a soft lead zirconate titanate
Njiwa, ABK
Fett, T
Lupascu, DC
Rödel, J
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2003, 86 (11) : 1973 - 1975
[6] On Crack-Tip Stresses as Crack-Tip Radii Decrease
Sinclair, G. B.
Meda, G.
Smallwood, B. S.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 2011, 78 (01): : 0110041 - 0110048
[7] Crack-Tip Toughness from Vickers Crack-Tip Opening Displacements for Materials with Strongly Rising R-Curves
Fuenfschilling, Stefan
Fett, Theo
Oberacker, Rainer
Hoffmann, Michael J.
Schneider, Gerold A.
Becher, Paul F.
Kruzic, Jamie J.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011, 94 (06) : 1884 - 1892
[8] FIELDS NEAR ELLIPTIC CRACK-TIP IN PIEZOELECTRIC CERAMICS
WANG, ZK
HUANG, SH
ENGINEERING FRACTURE MECHANICS, 1995, 51 (03) : 447 - 456
[9] THE EFFECTS OF CONSTRAINT ON CRACK-TIP FIELDS AND FRACTURE-TOUGHNESS
MA, FS
INTERNATIONAL JOURNAL OF FRACTURE, 1995, 69 (04) : 341 - 355
[10] Crack Bridging in Silicon Nitride Ceramics at Various Temperatures and Grain Boundary Toughness
Wei Sai
Porz, Lukas W.
Xie Zhipeng
Liu Bin
Chen Juan
Zhao Jiamin
RARE METAL MATERIALS AND ENGINEERING, 2015, 44 : 710 - 713

← 1 2 3 4 5 →