Effects of zinc coating on magnesium alloy-steel joints produced by cold metal transfer method

被引：19
作者：
Cao, R. [1 ]
Zhu, H. X. [1 ]
Wang, Q. [2 ]
Dong, C. [2 ]
Lin, Q. [1 ]
Chen, J. H. [1 ]
机构：
[1] Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Peoples R China
[2] Dalian Univ Technol, Minist Educ, Key Lab Mat Modificat Laser Ion & Electron Beams, Dalian 116024, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2016年 / 32卷 / 18期
关键词：
Magnesium; Steel; Brazed welded; Zinc; Aluminium; Cold metal transfer; COATED STEEL; MECHANICAL-PROPERTIES; MG ALLOY; WELDED-JOINTS; MILD-STEEL; SPOT WELDS; Q235; STEEL; MICROSTRUCTURE; INTERLAYER; ALUMINUM;
D O I：
10.1080/02670836.2016.1148107
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Magnesium alloys are lap-joined to galvanised and bare steel sheets by a cold metal transfer method. The weld appearance, cross-section, tensile strength and fracture behaviour of these joints are characterised by scanning electron microscopy, tensile tests and energy-dispersive spectroscopy. The joints were found to have good weld appearance and satisfactory tensile strength. The spreadability and wettability of the Mg alloy-galvanised steel joint are superior to those of the Mg alloy-bare steel joint, but the tensile strength is lower. In particular, the presence of Zn on the galvanised steel sheet improves wettability but decreases tensile strength. Aluminium has a high affinity for Fe, and the thinner layer of Fe-Al improves the mechanical properties of the Mg alloy-bare steel joint.
引用
收藏
页码：1805 / 1817
页数：13
相关论文
共 50 条
  • [31] Wire and arc additive manufacturing of 4043 Al alloy using a cold metal transfer method
    Zhi-qiang Liu
    Pei-lei Zhang
    Shao-wei Li
    Di Wu
    Zhi-shui Yu
    International Journal of Minerals Metallurgy and Materials, 2020, 27 (06) : 783 - 791
  • [32] Experimental and Simulation Study of Babbitt Alloy/Steel Composite in Swing Cold Metal Transfer (CMT) Welding Under Different Heat Input
    Fan, Chenkang
    Guo, Hao
    Wang, Jianmei
    JOM, 2024, 76 (11) : 6352 - 6362
  • [33] Wire and arc additive manufacturing of 4043 Al alloy using a cold metal transfer method
    Zhi-qiang Liu
    Pei-lei Zhang
    Shao-wei Li
    Di Wu
    Zhi-shui Yu
    International Journal of Minerals, Metallurgy and Materials, 2020, 27 : 783 - 791
  • [34] Weld overlay coating of Inconel 617 M on type 316 L stainless steel by cold metal transfer process
    Varghese, Paulson
    Vetrivendan, E.
    Dash, Manmath Kumar
    Ningshen, S.
    Kamaraj, M.
    Mudali, U. Kamachi
    SURFACE & COATINGS TECHNOLOGY, 2019, 357 : 1004 - 1013
  • [35] Microstructure and corrosion resistance of an Al-bronze coating prepared by cold metal transfer on 27SiMn steel
    Qi, Lan
    Chai, Linjiang
    Li, Zhihao
    Yang, Tao
    Zhou, Jie
    Cheng, Renju
    Zhang, Kaixiang
    SURFACE & COATINGS TECHNOLOGY, 2024, 478
  • [36] Enhancing corrosion resistance of AZ31B magnesium alloy substrate in 3.5 % NaCl solution with Al-Si coating prepared by cold metal transfer-based wire arc additive manufacturing
    Liu, Shuangyao
    Li, Zupeng
    Gao, Jiansen
    Wang, Wei
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2024, 19 (09):
  • [37] EVALUATION OF AN ALLOY 52/CLADDED CARBON STEEL REPAIR WELD BY COLD METAL TRANSFER
    Huotilainen, Caitlin
    Keinanen, Heikki
    Kuutti, Juha
    Nevasmaa, Pekka
    Siren, Henrik
    Virkkunen, Iikka
    PROCEEDINGS OF ASME 2021 PRESSURE VESSELS AND PIPING CONFERENCE (PVP2021), VOL 4, 2021,
  • [38] Cavitation erosion/corrosion synergy and wear behaviors of nickel-based alloy coatings on 304 stainless steel prepared by cold metal transfer
    Zhao, T.
    Zhang, S.
    Wang, Z. Y.
    Zhang, C. H.
    Zhang, D. X.
    Wang, N. W.
    Wu, C. L.
    WEAR, 2022, 510
  • [39] Tribological Behaviour of Austenitic Stainless Steel-Clad Surface Over Low Carbon Steel Produced by Cold Metal Transfer Welding Process
    Mishra, Varsha
    Yuvaraj, N.
    Vipin
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (06) : 1639 - 1650
  • [40] The spreading simulation of molten Al alloy on Q235 steel in the first cycle of cold metal transfer process
    Lin, Qiaoli
    Zeng, Chengzong
    Cao, Rui
    Chen, Jianhong
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 96 : 118 - 124
12345