Effects of zinc coating on magnesium alloy-steel joints produced by cold metal transfer method

被引：19
|
作者：
Cao, R. [1 ]
Zhu, H. X. [1 ]
Wang, Q. [2 ]
Dong, C. [2 ]
Lin, Q. [1 ]
Chen, J. H. [1 ]
机构：
[1] Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Peoples R China
[2] Dalian Univ Technol, Minist Educ, Key Lab Mat Modificat Laser Ion & Electron Beams, Dalian 116024, Peoples R China
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2016年 / 32卷 / 18期
关键词：
Magnesium; Steel; Brazed welded; Zinc; Aluminium; Cold metal transfer; COATED STEEL; MECHANICAL-PROPERTIES; MG ALLOY; WELDED-JOINTS; MILD-STEEL; SPOT WELDS; Q235; STEEL; MICROSTRUCTURE; INTERLAYER; ALUMINUM;
D O I：
10.1080/02670836.2016.1148107
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Magnesium alloys are lap-joined to galvanised and bare steel sheets by a cold metal transfer method. The weld appearance, cross-section, tensile strength and fracture behaviour of these joints are characterised by scanning electron microscopy, tensile tests and energy-dispersive spectroscopy. The joints were found to have good weld appearance and satisfactory tensile strength. The spreadability and wettability of the Mg alloy-galvanised steel joint are superior to those of the Mg alloy-bare steel joint, but the tensile strength is lower. In particular, the presence of Zn on the galvanised steel sheet improves wettability but decreases tensile strength. Aluminium has a high affinity for Fe, and the thinner layer of Fe-Al improves the mechanical properties of the Mg alloy-bare steel joint.
引用
收藏
页码：1805 / 1817
页数：13
相关论文
共 50 条
  • [1] Microstructure and properties of steel-aluminum Cold Metal Transfer joints
    Mezrag, B.
    Deschaux-Beaume, F.
    Sabatier, L.
    Wattrisse, B.
    Benachour, M.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 277 (277)
  • [2] Welding of aluminum alloy to zinc coated steel by cold metal transfer
    Yang, Shanglu
    Zhang, Jing
    Lian, Jin
    Lei, Yongpin
    MATERIALS & DESIGN, 2013, 49 : 602 - 612
  • [3] Joining of AZ31 Magnesium Alloy and Steel Sheet under Four Different Coating Conditions Based on Gas Metal Arc Weld-Brazing
    Kang, Minjung
    Kim, Cheolhee
    Kim, Young-Min
    MATERIALS TRANSACTIONS, 2017, 58 (01) : 95 - 102
  • [4] High cycle fatigue performance of cold metal transfer (CMT) brazed C-Mn-440 steel joints
    Singh, Jaivindra
    Arora, Kanwer Singh
    Shukla, Dinesh Kumar
    INTERNATIONAL JOURNAL OF FATIGUE, 2020, 137
  • [5] Microstructure and mechanical properties of cold metal transfer welded galvanized steel/magnesium alloy dissimilar joints
    Zhang, Chao
    Wu, Mingfang
    Wang, Yuxin
    Pu, Juan
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2020, 34 (1-3):
  • [6] Effect of welding speed on microstructure and mechanical properties of titanium alloy/stainless steel lap joints during cold metal transfer method
    Li, Gang
    Xu, Shengyu
    Lu, Xiaofeng
    Zhu, Xiaolei
    Guo, Yupeng
    Song, Jufeng
    METALLURGICAL RESEARCH & TECHNOLOGY, 2020, 117 (05)
  • [7] Effect of Heat Treatment on Properties of Inconel 718 Alloy Coatings Produced by Cold Metal Transfer
    Zheng, Zehong
    Xue, Jiaxiang
    Jin, Li
    Shen, Qingkai
    Yu, Xiaoyan
    Ou, Ning
    Dong, Changwen
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [8] Effect of CoCrNi Interlayer on the Microstructure, Mechanical, and Corrosion Properties of Cold Metal Transfer Al/Steel Joints
    Jiang, Jiawei
    Peng, Mingjian
    Yang, Jin
    Xu, Wenhu
    Liang, Ying
    Zheng, Min
    Liu, Hongbing
    Shi, Junmiao
    Tan, Caiwang
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 33 (19) : 10560 - 10573
  • [9] Mechanical properties of aluminum to steel dissimilar spot joints produced by cold metal transfer weld-brazing
    Huda, Nazmul
    Chen, James
    Gerlich, Adrian P.
    FORCES IN MECHANICS, 2023, 11
  • [10] Cold metal transfer welding-brazing of pure titanium TA2 to magnesium alloy AZ31B
    Cao, R.
    Wang, T.
    Wang, C.
    Feng, Z.
    Lin, Q.
    Chen, J. H.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 605 : 12 - 20
12345