An Investigation of Slot-Pole Combinations for Interior Permanent Magnet Synchronous Machines with Different Magnet Topologies

被引：0

作者：

Castano, Sandra M. ^{[1
]}

Jiang, James W. ^{[1
]}

Bilgin, Berker ^{[1
]}

Sathyan, Anand ^{[2
]}

Dadkhah, Hossein ^{[2
]}

Emadi, Ali ^{[1
]}

机构：

[1] McMaster Univ, McMaster Inst Automot Res & Technol MacAUTO), Hamilton, ON, Canada

[2] Fiat Chrysler Automobiles US LLC, Auburn Hills, MI USA

来源：

2017 IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE (IEMDC) | 2017年

基金：

加拿大自然科学与工程研究理事会;

关键词：

fractional-slot winding; integer-slot winding; interior permanent magnet synchronous machines; traction motor; TORQUE RIPPLE; REDUCTION; DESIGN; IPM;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

In this paper three different magnet configurations, e.g. single V-shape, double V-shape and delta-shape are investigated in the integer-slot 48/8 and fractional slot 36/8 interior permanent magnet synchronous machines (IPMSM). An optimization procedure for maximizing torque per ampere is used to compare these six motor models under the same output torque levels. The torque qualities at both low-and high-speed points for these six motor models are studied first. Fast Fourier Transform (FFT) analysis is also performed on the torque waveforms. Harmonics of magnetomotive force of the rotors and stators are analyzed. Radial force waveforms are also compared for these motor models. 36/8 winding configuration improves torque quality at both low-and high-speed points.

引用

页数：8

共 50 条

[21] Reducing Torque Ripple Using Axial Pole Shaping in Interior Permanent Magnet Machines
Du, Zhentao S.
Lipo, Thomas A.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2020, 56 (01) : 148 - 157
[22] An Overview of Rotor Pole Optimization Techniques for Permanent Magnet Synchronous Machines
Wang K.
Sun H.
Zhang L.
Liu C.
Zhu Z.
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2017, 37 (24): : 7304 - 7317
[23] Complex Vector Modeling and Control of Interior Permanent Magnet Synchronous Machines
Tungare, Samira
Agrawal, Shivang
Mukherjee, Debranjan
Banerjee, Arijit
2023 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE, IEMDC, 2023,
[24] Hybrid-Excited Stator Slot Permanent Magnet Machines-Influence of Stator and Rotor Pole Combinations
Zhu, Z. Q.
Afinowi, I. A. A.
Guan, Y.
Mipo, J. C.
Farah, P.
IEEE TRANSACTIONS ON MAGNETICS, 2016, 52 (02)
[25] Comparison and analysis of dual stator permanent magnet vernier machines with different pole/slot combinations for low speed direct drive applications
Zhang, Yang
Lin, Heyun
Fang, Shuhua
Huang, Yunkai
INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2016, 50 (04) : 617 - 626
[26] Optimum Slot and Pole Design for Vibration Reduction in Permanent Magnet Synchronous Motors
Mendizabal, Mikel
McCloskey, Alex
Poza, Javier
Zarate, Sergio
Iriondo, Jaione
Irazu, Leire
APPLIED SCIENCES-BASEL, 2021, 11 (11):
[27] Bearingless Permanent-Magnet Motor with 4/12 Slot-Pole Ratio for Bioreactor Stirring Applications
Reichert, Thomas
Nussbaumer, Thomas
Gruber, Wolfgang
Kolar, Johann W.
IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2011, 16 (03) : 431 - 439
[28] A General Investigation of the Sensitiveness of Brushless Permanent Magnet Synchronous Machines Considering Magnet Tolerances
Bramerdorfer, Gerd
IEEE TRANSACTIONS ON MAGNETICS, 2020, 56 (01)
[29] A Comparison Between Conventional and Flux-Intensifying Interior Permanent Magnet Synchronous Machines
Shehata, E. G.
2021 22ND IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY (ICIT), 2021, : 121 - 126
[30] Interior Permanent Magnet Synchronous Machines With Composed T-Shaped Notching Rotor
Wang, Bingdong
Wang, Daohan
Peng, Chen
Wang, Chengqi
Xu, Cheng
Wang, Xiuhe
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2024, 71 (06) : 5519 - 5529

← 1 2 3 4 5 →