Vibration - Impact study on AlMg4.5Mn reinforced nanoclay composites

被引：6

作者：

Kumar, P. S. Samuel Ratna ^{[1
]}

Alexis, S. John ^{[2
]}

Mohan, M. Saravana ^{[3
]}

Sudhagar, P. Edwin ^{[4
]}

Madara, Sahith Reddy ^{[5
]}

机构：

[1] Kumaraguru Coll Technol, Dept Mech Engn, Coimbatore, Tamil Nadu, India

[2] Kumaraguru Coll Technol, Dept Automobile Engn, Coimbatore, Tamil Nadu, India

[3] Kumaraguru Coll Technol, Dept Mechatron Engn, Coimbatore, Tamil Nadu, India

[4] Vellore Inst Technol, Sch Mech Engn, Vellore, Tamil Nadu, India

[5] Univ Sharjah, Sharjah Acad Astron Space Sci & Technol, Sharjah, U Arab Emirates

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 28卷

关键词：

AlMg4.5Mn; Nanoclay; Low-velocity impact test; Natural frequency; Vibration; BEHAVIOR;

D O I：

10.1016/j.matpr.2020.01.096

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study shows the vibration and low velocity impact behaviour of AlMg4.5Mn reinforced nanoclay nanocomposites at room temperature. Composite samples with different weight percentage of nanoclay were fabricated using liquid state synthesis casting technique, to achieve homogeneous dispersion of Nanoclay. The material characterization was studied by Scanning Electron Microscope (SEM) and Energy -dispersive X-ray spectroscopy (EDS). From the study it was concluded that the Hardness value of the aluminium alloy reinforced nanoclay was increased in addition of nanoclay weight percentage. The natural frequencies of impacted AlMg4.5Mn reinforced nanoclay composites was found to be increased in addition of 2.5 wt% nanoclay. (C) 2019 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the 2nd International Conference on Recent Advances in Materials & Manufacturing Technologies.

引用

页码：1140 / 1143

页数：4

共 14 条

[1]

Ahmad Furqan, 2018, ADV COMPO MAT, P1

[2]

Alexis S. John, 2018, INT J VEH STRUCT SYS, V10, P278

[3] Recent developments in advanced aircraft aluminium alloys [J].

Dursun, Tolga ;

Soutis, Costas .

MATERIALS & DESIGN, 2014, 56 :862-871

[4] Low velocity impact response of basalt-aluminium fibre metal laminates [J].

Ferrante, L. ;

Sarasini, F. ;

Tirillo, J. ;

Lampani, L. ;

Valente, T. ;

Gaudenzi, P. .

MATERIALS & DESIGN, 2016, 98 :98-107

[5]

Kumar P., 2019, THERMAL KINETIC ANAL, P1

[6] Uniform Corrosion Behavior of AA7075 with Nanoclay [J].

Kumar, P. S. Samuel Ratna ;

Alexis, S. John ;

Smart, D. S. Robinson .

MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) :9013-9019

[7] Effect of graphenenano-platelets on the mechanical properties of Mg/3wt% Al alloy-nanocomposite [J].

Kumar, Pravir ;

Kujur, MilliSuchita ;

Mallick, Ashis ;

Tun, Khin Sandar ;

Gupta, Manoj .

INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS & MANUFACTURING TECHNOLOGIES, 2018, 346

[8] Investigation of impact behaviour of aluminium based SiC particle reinforced metal-matrix composites [J].

Ozden, Sedat ;

Ekici, Recep ;

Nair, Fehmi .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (02) :484-494

[9] Low Velocity Impact Analysis on Composite Structures - A Review [J].

Patil, Shreekant ;

Reddy, D. Mallikarjuna ;

Reddy, Munirami .

ADVANCES IN MECHANICAL DESIGN, MATERIALS AND MANUFACTURE, 2018, 1943

[10]

Polmear I.J., 2004, Materials Forum, V28, P1

← 1 2 →