NEW CRITERIA TO ASSESS SEISMIC AND ROCK BURST HAZARD IN COAL MINES

The paper presents new criteria of seismic and rock burst hazard assessment in Polish hard coal mines where longwall mining system is common practice. The presented criteria are based on the results of continuous recording of seismic events and analysis of selected seismological parameters: spatial location of seismic event in relation to mining workings, seismic energy, seismic energy release per unit coal face advance, b-value of Gutenberg-Richter law, seismic energy index El, seismic moment M-0, weighted value of peak particle velocity PPVw. These parameters are determined in a moving daily time windows or time windows with fixed number of seismic tremors. Time changes of these parameters are then compared with mean value estimated in the analyzed area. This is the basis to indicate the zones of high seismic and rock burst hazard in specific moment in time during mining process. Additionally, the zones of high seismic and rock burst hazard are determined by utilization of passive seismic tomography method. All the calculated seismic parameters in moving time windows are used to quantify seismic and rock burst hazard by four level scales. In practice, assessment of seismic and rock burst hazard is used to make daily decision about using rock burst prevention activities and correction of further exploitation of monitored coal panel.