Split-Hopkinson Pressure Bar Test of Silicone Rubber: Considering Effects of Strain Rate and Temperature

被引:6
作者
Zhu, Xintao [1 ]
Zhang, Xiaojing [1 ]
Yao, Wenjin [1 ]
Li, Wenbin [1 ]
机构
[1] Nanjing Univ Sci & Technol, ZNDY Ministerial Key Lab, Nanjing 210094, Peoples R China
关键词
silicone rubber; split-Hopkinson pressure bar; strain rate; temperature; differential scanning calorimetry; DYNAMIC DEFORMATION-BEHAVIOR;
D O I
10.3390/polym14183892
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Using a split-Hopkinson pressure bar test instrument with a temperature control device, in this work, silicone rubber was tested at different temperatures (-40 degrees C-200 degrees C) and different strain rates (1.2 x 10(3) s(-1)-7.2 x 10(3) s(-1)). The results showed that the dynamic mechanical properties of silicone rubber were strain-rate sensitive at different temperatures and the yield strength of the silicone rubber increased with an increase in the strain rate. At a higher strain rate, silicone rubber showed temperature sensitivity. With a decrease in the strain rate, the influence of temperature on silicone rubber gradually decreased. Differential scanning calorimetry analysis showed that silicone rubber had good thermal stability at high temperatures. When the temperature was as low as -40 degrees C, the silicone rubber underwent a glass transition, showing the characteristics of brittle materials.
引用
收藏
页数:12
相关论文
共 50 条
[21]   Split-Hopkinson pressure bar tests on dynamic properties of concrete made of seawater and marine aggregates [J].
Xu J. ;
Tang Y. ;
Chen Y. ;
Chen Z. .
Zhendong yu Chongji/Journal of Vibration and Shock, 2022, 41 (14) :233-242
[22]   Characterization and modeling of mechanical behavior of single crystal titanium deformed by split-Hopkinson pressure bar [J].
Morrow, B. M. ;
Lebensohn, R. A. ;
Trujillo, C. P. ;
Martinez, D. T. ;
Addessio, F. L. ;
Bronkhorst, C. A. ;
Lookman, T. ;
Cerreta, E. K. .
INTERNATIONAL JOURNAL OF PLASTICITY, 2016, 82 :225-240
[23]   Development of a Split Hopkinson Pressure Bar Machine for High Strain Rate Testing of Bonded Joints [J].
Boland, Alexandre J. ;
Lopes, Antonio M. ;
Moreira da Silva, Carlos M. S. ;
Tenreiro, Antonio F. G. ;
da Silva, Lucas F. M. ;
Nunes, P. D. P. ;
Marques, E. A. S. ;
Carbas, R. J. C. .
JOURNAL OF TESTING AND EVALUATION, 2022, 50 (01) :260-274
[24]   Deformation behavior of 42CrMo4 over a wide range of temperatures and strain rates in Split-Hopkinson pressure bar tests [J].
Kimm, Janis S. ;
Bergmann, Jim A. ;
Woeste, Florian ;
Poehl, Fabian ;
Wiederkehr, Petra ;
Theisen, Werner .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 826
[25]   An Effective Pulse-Shaping Technique for Testing Stainless Steel Alloys in a Split-Hopkinson Pressure Bar [J].
A. A. H. Ameri ;
A. D. Brown ;
M. Ashraf ;
P. J. Hazell ;
Md. Z. Quadir ;
J. P. Escobedo-Diaz .
Journal of Dynamic Behavior of Materials, 2019, 5 :39-50
[26]   An Effective Pulse-Shaping Technique for Testing Stainless Steel Alloys in a Split-Hopkinson Pressure Bar [J].
Ameri, A. A. H. ;
Brown, A. D. ;
Ashraf, M. ;
Hazell, P. J. ;
Quadir, Md. Z. ;
Escobedo-Diaz, J. P. .
JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS, 2019, 5 (01) :39-50
[27]   An Open-Source Algorithm for Correcting Stress Wave Dispersion in Split-Hopkinson Pressure Bar Experiments [J].
Van Lerberghe, Arthur ;
Li, Kin Shing O. ;
Barr, Andrew D. ;
Clarke, Sam D. .
SENSORS, 2025, 25 (01)
[28]   High Strain Rate Response of Rocks Under Dynamic Loading Using Split Hopkinson Pressure Bar [J].
Mishra S. ;
Meena H. ;
Parashar V. ;
Khetwal A. ;
Chakraborty T. ;
Matsagar V. ;
Chandel P. ;
Singh M. .
Geotechnical and Geological Engineering, 2018, 36 (01) :531-549
[29]   Dynamic Brazilian test of concrete using split Hopkinson pressure bar [J].
Chen, Xudong ;
Ge, Limei ;
Zhou, Jikai ;
Wu, Shengxing .
MATERIALS AND STRUCTURES, 2017, 50 (01)
[30]   Experimental and numerical investigation of pulse-shaped split Hopkinson pressure bar test [J].
Naghdabadi, R. ;
Ashrafi, M. J. ;
Arghavani, J. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 539 :285-293