Synthesis and characterization of LaPO4-coated α-Al2O3 powders

被引：11

作者：

Zheng, Qiuju ^{[1
]}

Wang, Xin ^{[1
]}

Tian, Jintao ^{[1
]}

Liu, Zifeng ^{[1
]}

Huang, Chuanshun ^{[1
]}

Wang, Jing ^{[1
]}

Xu, Jihui ^{[1
]}

机构：

[1] Ocean Univ China, Inst Mat Sci & Engn, Qingdao 266100, Peoples R China

来源：

CERAMICS INTERNATIONAL | 2009年 / 35卷 / 02期

关键词：

Powders: chemical preparatiom; Composite; Chemical properties Heterogeneous nucleation processing; HETEROGENEOUS NUCLEATION; MICROSTRUCTURE; COMPOSITE; MONAZITE; BEHAVIOR; ALUMINA; GROWTH;

D O I：

10.1016/j.ceramint.2008.03.014

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

LaPO4-coated alpha-Al2O3 powders were successfully synthesized through the heterogeneous precipitation method. The coated powders were characterized by XRD, TEM. EDS, and zeta-potential measurements. According to the XRD results, the coated powders consisted of only alpha-Al2O3 and monoclinic LaPO4. The TEM examinations and EDS analysis showed that under alkaline condition a homogeneous coating with thickness of similar to 10 nm was obtained on the alpha-Al2O3 powder surface. The zeta-potential measurements showed the coated powders to have a pH value of 7.85 at isoelectric point, similar to that of LaPO4 (pH value of 8.21). This was in good agreement with the TEM and EDS results, indicating a successful coating process in our experiment. (C) 2008 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：897 / 900

页数：4

共 50 条

[31] Microstructure, phase composition and mechanical properties of plasma sprayed Al2O3,Cr2O3 and Cr2O3-Al2O3 composite coatings
Zamani, P.
Valefi, Z.
SURFACE & COATINGS TECHNOLOGY, 2017, 316 : 138 - 145
[32] Synthesis and characterization of Al2O3 hollow spheres
Liu, Runjing
Li, Yanjv
Zhao, Hua
Zhao, Fengyun
Hu, Yongqi
MATERIALS LETTERS, 2008, 62 (17-18) : 2593 - 2595
[33] Preparation, thermal stability and sintering behavior of Ni/Al2O3 coated powders
Lu, JS
Gao, L
Gui, LH
Guo, JK
MATERIALS CHEMISTRY AND PHYSICS, 2001, 72 (03) : 352 - 355
[34] Fabrication of Ni-coated Al2O3 powders by the heterogeneous precipitation method
Li, GJ
Huang, XX
Guo, JK
MATERIALS RESEARCH BULLETIN, 2001, 36 (7-8) : 1307 - 1315
[35] Effect of LaPO4 content on the machinability, microstructure and biological properties of Al2O3
Department of Ceramic Engineering, National Institute of Technology, Rourkela
769008, India
InterCeram: Int. Ceram. Rev., 6 (298-302): : 298 - 302
[36] Mechanical Properties of the Directionally Solidified Ceramic Eutectic of Al2O3/Al16Ti5O34 Phase Structure
Abali, Serkan
Ekerim, Ahmet
HIGH TEMPERATURE MATERIALS AND PROCESSES, 2013, 32 (03) : 309 - 315
[37] Improvement in surface performance of Al3Ti+TiB2/(Ni coated WC) laser cladded coating with Al2O3/nano-Y2O3
Li, J. N.
Chen, C. Z.
Zhang, C. F.
Li, W.
MATERIALS RESEARCH INNOVATIONS, 2011, 15 (05) : 344 - 348
[38] Synthesis and Characterization of Ti:Al2O3 Nano-Powders by Co-Precipitation Method
Mi Xiao-Yun
Xu Sheng-Nan
Liu Ru-Hao
Zhang Qing-Chao
Zhang Xi-Yan
CHINESE JOURNAL OF INORGANIC CHEMISTRY, 2011, 27 (12) : 2401 - 2404
[39] Flash sintering produces eutectic microstructures in Al2O3-LaPO4 versus conventional microstructures in 8YSZ-LaPO4
Yang, Yingjie
Mumm, Daniel R.
Mecartney, Martha L.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2021, 104 (08) : 3895 - 3909
[40] PANI-derived polymer/Al2O3 nanocomposites: synthesis, characterization, and electrochemical studies
Benykhlef, S.
Bekhoukh, A.
Berenguer, R.
Benyoucef, A.
Morallon, E.
COLLOID AND POLYMER SCIENCE, 2016, 294 (12) : 1877 - 1885

← 1 2 3 4 5 →