Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading

被引：171

作者：

Mohsenizadeh, S. ^{[1
]}

Alipour, R. ^{[2
]}

Rad, M. Shokri ^{[1
]}

Nejad, A. Farokhi ^{[1
]}

Ahmad, Z. ^{[1
]}

机构：

[1] Univ Teknol Malaysia, Fac Mech Engn, Dept Appl Mech & Design, Johor Baharu 81300, Malaysia

[2] Islamic Azad Univ, Dept Mech Engn, Mahshahr Branch, Mahshahr, Iran

来源：

MATERIALS & DESIGN | 2015年 / 88卷

关键词：

Auxetic foam; Energy absorption; Thin-walled tube; Crashworthiness; Negative Poisson's ratio; THIN-WALLED TUBES; CIRCULAR ALUMINUM TUBES; ENERGY-ABSORPTION; POISSONS RATIO; CONICAL TUBES; BENDING BEHAVIOR; DESIGN; DEFORMATION; COLUMNS; PERFORMANCE;

D O I：

10.1016/j.matdes.2015.08.152

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This present study investigates experimentally and numerically the crush response and energy absorption performances of auxetic foam-filled square tubes under quasi-static axial loading. Three different structures: empty, conventional and auxetic foam-filled square tubes have been compared and examined with respect to the deformation modes and load-displacement curves. Standard compression tests were conducted on the tubes to evaluate the influence of auxetic foam in the energy absorption of empty tubes. Moreover, results from computer simulation have also been supplemented to further examine the abovementioned effect It is discovered that the auxetic foam-filled square tube is superior to empty and conventional foam-filled square tubes in terms of all studied crashworthiness indicators. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：258 / 268

页数：11

共 72 条

[1] AXIAL CRUSHING OF FOAM-FILLED COLUMNS
ABRAMOWICZ, W
WIERZBICKI, T
[J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1988, 30 (3-4) : 263 - 271
[2] Abramowicz W., 1986, INT J IMPACT ENG, V4, P243, DOI DOI 10.1016/0734-743X(86)90017-5
[3] Abramowicz W., 1984, Int. J. Impact Eng, V2, P179, DOI [DOI 10.1016/0734-743X(84)90005-8, 10.1016/0734-743X(84)90005-8]
[4] Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading
Ahmad, Z.
Thambiratnam, D. P.
Tan, A. C. C.
[J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2010, 37 (05) : 475 - 488
[5] Application of foam-filled conical tubes in enhancing the crashworthiness performance of vehicle protective structures
Ahmad, Z.
Thambiratnam, D. P.
[J]. INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 2009, 14 (04) : 349 - 363
[6] Crushing response of foam-filled conical tubes under quasi-static axial loading
Ahmad, Z.
Thambiratnam, D. P.
[J]. MATERIALS & DESIGN, 2009, 30 (07): : 2393 - 2403
[7] Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading
Ahmad, Z.
Thambiratnam, D. P.
[J]. COMPUTERS & STRUCTURES, 2009, 87 (3-4) : 186 - 197
[8] Quasi-static axial crushing of extruded polystyrene foam-filled thin-walled aluminum tubes:: Experimental and numerical analysis
Aktay, L
Toksoy, AK
Güden, M
[J]. MATERIALS & DESIGN, 2006, 27 (07) : 556 - 565
[9] Ali M.N., J MANUF SYST
[10] The reliability of finite element analysis results of the low impact test in predicting the energy absorption performance of thin-walled structures
Alipour, R.
Nejad, A. Farokhi
Izman, S.
[J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (05) : 2035 - 2045

← 1 2 3 4 5 6 7 8 →