Reciprocating Wear Behavior of Ni-Co Alloys Produced by Pulse Current Electrodeposition

被引：7

作者：

Karslioglu, R. ^{[1
]}

Uysal, M. ^{[1
]}

Alp, A. ^{[1
]}

Akbulut, H. ^{[1
]}

机构：

[1] Sakarya Univ, Fac Engn, Dept Met & Mat Engn, TR-54187 Sakarya, Turkey

来源：

ACTA PHYSICA POLONICA A | 2013年 / 123卷 / 02期

关键词：

TRIBOLOGICAL PROPERTIES;

D O I：

10.12693/APhysPolA.123.424

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

In the present work, Ni-Co alloy coatings were prepared from a modified Watt type electrolyte by direct current. For this purpose, current density was investigated for optimization to obtain high quality coatings on the steel copper substrates. The depositions were controlled to obtain specific thickness (between 50 and 200 mu m). The characterization of the coatings was investigated by scanning electron microscopy and X-ray diffraction facilities. The hardness of the resultant coatings was also measured. The effects of the current density on the tribological properties of Ni-Co coatings were investigated. The results showed that although increasing current density showed increasing coating thickness, the wear resistance of the Ni-Co alloys was decreased due to Co depletion in the deposited layer. DOT: 10.12693/APhysPolA.123.424

引用

页码：424 / 426

页数：3

共 5 条

[1] Resonance enhancement of micromachined resonators with strong mechanical-coupling between two degrees of freedom [J].