Preparation and properties of POSS/epoxy composites for electronic packaging applications

被引:54
|
作者
Rashid, Erfan Suryani Abd [1 ]
Ariffin, Kamarshah [1 ]
Kooi, Chee Choong [2 ]
Akil, Hazizan Md [1 ]
机构
[1] Univ Sains Malaysia, Sch Mat & Mineral Resources Engn, Nibong Tebal 14300, Pulau Pinang, Malaysia
[2] Intel Technol Sdn Bhd Pg9, Bayan Lepas Ind Zone, Bayan Lepas 11900, Penang, Malaysia
关键词
Polymer matrix; Thermal analysis; Microstructure; POLYHEDRAL OLIGOMERIC SILSESQUIOXANE; THERMAL CHARACTERIZATION; NANOCOMPOSITES; SILICA;
D O I
10.1016/j.matdes.2008.04.065
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper reports the preparation and properties of polyhedral oligomer silsesquioxanes (POSS)/epoxy composites. Two compositions of POSS by volume, typically at 1% and 2% were used as filler in epoxy matrix. The composites were studied in terms of flexural, thermal and morphological properties and the results show an improvement in several properties. Flexural strength of epoxy was found to increase significantly with addition of 1 vol% and 2 vol% of POSS. Thermal stability of POSS/epoxy composites in oxygen and nitrogen atmospheres were also studied using TGA. From the thermo-oxidation analysis, it was found that POSS/epoxy composite can sustain higher temperature prior to thermal decomposition. In terms of coefficient of thermal expansion (CTE), the values were also found to increase with addition of POSS particles which could be attributed to the stearic hindrance of the polymer chain. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1 / 8
页数:8
相关论文
共 50 条
  • [1] Preparation, thermal and mechanical properties of POSS epoxy hybrid composites
    Xiao, Fei
    Sun, Yangyang
    Xiu, Yonghao
    Wong, C. P.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 104 (04) : 2113 - 2121
  • [2] Dielectric Properties of Epoxy/POSS composites
    Heid, Thomas
    Frechette, Michel
    David, Eric
    2013 IEEE CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA (CEIDP), 2013, : 751 - 755
  • [3] Preparation and properties of epoxy POSS modified epoxy resin
    Jin J.
    An Q.
    Yang B.
    Shi S.
    Tian H.
    Huagong Xuebao/CIESC Journal, 2020, 71 (05): : 2432 - 2439
  • [4] The preparation and properties of Si3O4-filled epoxy resin composites for electronic packaging
    Fu, Renli
    Chen, Kexin
    Tang, Jin
    Shen, Yuan
    He, Hong
    HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 1346 - 1349
  • [5] Electrical Properties of Epoxy/POSS Composites with Homogeneous Nanostructure
    Huang, Xingyi
    Li, Yong
    Liu, Fei
    Jiang, Pingkai
    Iizuka, Tomonori
    Tatsumi, Kohei
    Tanaka, Toshikatsu
    IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2014, 21 (04) : 1516 - 1528
  • [6] Preparation and thermal properties of PC/POSS composites
    Cai, Hualun
    Xu, Kai
    Liu, Huan
    Su, Jiangxun
    Liu, Xin
    Fu, Zien
    Chen, Mingcai
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2011, 27 (12): : 114 - 118
  • [7] Preparation and Properties of New Polyphenylene Sulfide/AlN Composites for Electronic Packaging
    R. K. Goyal
    P. Jadhav
    A. N. Tiwari
    Journal of Electronic Materials, 2011, 40 : 1377 - 1383
  • [8] Preparation and Properties of New Polyphenylene Sulfide/AlN Composites for Electronic Packaging
    Goyal, R. K.
    Jadhav, P.
    Tiwari, A. N.
    JOURNAL OF ELECTRONIC MATERIALS, 2011, 40 (06) : 1377 - 1383
  • [9] Preparation and Properties of Epoxy Resin/Silicone Hybrids for Electronic Applications
    Lee, Seon Suk
    Song, G. S.
    Lee, D. W.
    Kim, H. N.
    Kang, K. H.
    Lee, Dai Soo
    2009 11TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC 2009), 2009, : 348 - 351
  • [10] Modeling the Thermal Conductivity of Epoxy/POSS and Epoxy/POSS/cBN composites
    Heid, T.
    David, E.
    Frechette, M.
    2016 IEEE INTERNATIONAL CONFERENCE ON DIELECTRICS (ICD), VOLS 1-2, 2016, : 414 - 417