Bonded joints with composite adherends. Part II. Finite element analysis of joggle lap joints

被引：36

作者：

Taib, AA ^{[1
]}

Boukhili, R ^{[1
]}

Achiou, S ^{[1
]}

Boukehili, H ^{[1
]}

机构：

[1] Ecole Polytech Montreal, Dept Mech Engn, Montreal, PQ H39 3A7, Canada

来源：

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 2006年 / 26卷 / 04期

基金：

加拿大自然科学与工程研究理事会;

关键词：

composites; finite element stress analysis; fracture; joint design;

D O I：

10.1016/j.ijadhadh.2005.03.014

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

This paper describes a finite element analysis of two adhesive bonded joint configurations, namely single lap joint and joggle lap joint, for which an extensive experimental analysis had been made previously. The adherends were assumed to behave as linearly elastic materials, while the adhesive layer was assumed to be nonlinear. The nonlinear geometric deformations of the joint were also taken into account. The numerical results agree well with the experimental results up to 2000 N. Moreover, the distinctive geometric deformations observed experimentally with the joggle lap joint under loading were accurately predicted by the finite element model. (C) 2005 Elsevier Ltd. All rights reserved.

引用

页码：237 / 248

页数：12

共 13 条

[1] Adams R.D., 1974, J STRAIN ANAL, V9, P185, DOI [DOI 10.1243/03093247V093185, 10.1243/03093247V093185]
[2] *ANSYS, 1997, 1 ANSYS
[3] Investigating the effect of spew and chamfer size on the stresses in metal/plastics adhesive joints
Belingardi, G
Goglio, L
Tarditi, A
[J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2002, 22 (04) : 273 - 282
[4] NONLINEAR ADHESIVE BONDED JOINT DESIGN ANALYSES
BIGWOOD, DA
CROCOMBE, AD
[J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1990, 10 (01) : 31 - 41
[5] THE STRESS STATE AND FAILURE PROPERTIES OF ADHESIVE-BONDED PLASTIC METAL JOINTS
DORN, L
LIU, WP
[J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1993, 13 (01) : 21 - 31
[6] GIVLER RC, 1981, ASTM STP, V749, P61
[7] Gleich DM., 2002, STRESS ANAL STRUCTUR
[8] A three-dimensional finite element model for stress analysis of adhesive joints
Gonçalves, JPM
de Moura, MFSF
de Castro, PMST
[J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2002, 22 (05) : 357 - 365
[9] Effect of spew geometry on stresses in single lap adhesive joints
Lang, TP
Mallick, PK
[J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1998, 18 (03) : 167 - 177
[10] Non-linear modeling of tubular adhesive scarf joints loaded in tension
Nguyen, V
Kedward, KT
[J]. JOURNAL OF ADHESION, 2001, 76 (03) : 265 - 292

← 1 2 →