Effect of laser shock peening on microstructural, mechanical and corrosion properties of laser beam welded commercially pure titanium

被引：75

作者：

Chattopadhyay, Angshuman ^{[1
]}

Muvvala, Gopinath ^{[1
,2
]}

Sarkar, Sagar ^{[1
]}

Racherla, Vikranth ^{[1
]}

Nath, Ashish Kumar ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Mech Engn, Kharagpur, W Bengal, India

[2] Indian Inst Technol, Dept Mech & Aerosp Engn, Hyderabad, India

来源：

OPTICS AND LASER TECHNOLOGY | 2021年 / 133卷

关键词：

Titanium; Laser beam welding; Laser shock peening; Thermal cycles; Tensile strength; Fatigue life; FATIGUE LIFE; TI-6AL-4V ALLOY; ALPHA-TITANIUM; IMPROVEMENT; RESISTANCE; FAILURES; BEHAVIOR; MODE;

D O I：

10.1016/j.optlastec.2020.106527

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

In the present study, laser beam welding of commercially pure titanium has been carried out at different scan speeds in the range from 2.4 m/min to 4 m/min at 2.15 kW laser power and its influence on molten pool thermal history, microstructure, residual stress, mechanical and corrosion properties has been studied. Weld thermals cycles were monitored using a single wavelength infrared pyrometer. Effect of laser shock peening on laser welded specimens was also studied. Laser shock peening inducted significant amount of compressive residual stress through plastic deformation. Strain hardening and changes in microstructure such as formation of twining lead to significant improvement in tensile and fatigue properties. Micro-hardness in the fusion zone at subsurface region got improved by similar to 26% and fatigue strength increased by similar to 24%. Corrosion resistance also got increased due to high compressive residual stress and grain refinement after LSP.

引用

页数：13

共 40 条

[31] Investigation on the mode of failures and fatigue life of laser-based powder bed fusion produced stainless steel parts under variable amplitude loading conditions [J].

Sarkar, Sagar ;

Kumar, Cheruvu Siva ;

Nath, Ashish Kumar .

ADDITIVE MANUFACTURING, 2019, 25 :71-83

[32] Effect of mean stresses on mode of failures and fatigue life of selective laser melted stainless steel [J].

Sarkar, Sagar ;

Kumar, Cheruvu Siva ;

Nath, Ashish Kumar .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 700 :92-106

[33] Improvement in mechanical properties of titanium alloy (Ti-6Al-7Nb) subject to multiple laser shock peening [J].

Shen, Xiaojun ;

Shukla, Pratik ;

Nath, Subhasisa ;

Lawrence, Jonathan .

SURFACE & COATINGS TECHNOLOGY, 2017, 327 :101-109

[34]

SHIGANOV I N, 2018, IOP Conference Series: Journal of Physics: Conference Series, V1109

[35] Effect of welding parameters on morphology and mechanical properties of Ti-6Al-4V laser beam welded butt joints [J].

Squillace, A. ;

Prisco, U. ;

Ciliberto, S. ;

Astarita, A. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (02) :427-436

[36]

Sten W. M., 2010, LASER MAT PROCESSING, DOI [10.1007/978-1-84996-062-5, DOI 10.1007/978-1-84996-062-5]

[37] Effect of laser shock peening on microstructure and hot corrosion of TC11 alloy [J].

Tong, Zhaopeng ;

Ren, Xudong ;

Ren, Yunpeng ;

Dai, Fengze ;

Ye, Yunxia ;

Zhou, Wangfan ;

Chen, Lan ;

Ye, Zhao .

SURFACE & COATINGS TECHNOLOGY, 2018, 335 :32-40

[38] Effect of Laser Shock Peening on Commercially Pure Titanium-1 Weldment Fabricated by Gas Tungsten Arc Welding Technique [J].

Varin, Sandeep ;

Agarwal, Mayank ;

Chugh, Aditya ;

Manikandan, M. ;

Prabhakaran, S. ;

Kalainathan, S. ;

Shukla, Pratik ;

Lawrence, Jonathan ;

Arivazhagan, N. .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (06) :1569-1573

[39]

Zhang CH, 2015, INT J ELECTROCHEM SC, V10, P9167

[40] Improvement of fatigue life of Ti-6Al-4V alloy by laser shock peening [J].

Zhang, X. C. ;

Zhang, Y. K. ;

Lu, J. Z. ;

Xuan, F. Z. ;

Wang, Z. D. ;

Tu, S. T. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (15) :3411-3415

← 1 2 3 4 →