Wear Behavior of Mechanically Alloyed Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes

被引:7
作者
Lin, Yung-Sheng [1 ]
Hsu, Chih-Feng [2 ]
Chen, Jyun-Yu [3 ]
Cheng, Yeh-Ming [3 ]
Lee, Pee-Yew [3 ]
机构
[1] Natl United Univ, Dept Chem Engn, Miaoli 360, Taiwan
[2] Chenming Mold Ind Corp, Taipei 114, Taiwan
[3] Natl Taiwan Ocean Univ, Inst Mat Engn, Keelung 202, Taiwan
关键词
mechanical alloying; bulk metallic glass composite; super-cooled liquid region; vacuum hot pressing; wear; AMORPHOUS-ALLOYS; ABSORPTION; RESISTANCE;
D O I
10.3390/met6110289
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The present paper reports the preparation and wear behavior of mechanically alloyed Ti- based bulk metallic glass composites containing carbon nanotube (CNT) particles. The differential scanning calorimeter results show that the thermal stability of the amorphous matrix is affected by the presence of CNT particles. Changes in glass transition temperature (Tg) and crystallization temperature (Tx) suggest that deviations in the chemical composition of the amorphous matrix occurred because of a partial dissolution of the CNT species into the amorphous phase. Although the hardness of CNT/Ti50Cu28Ni15Sn7 bulk metallic glass composites is increased with the addition of CNT particles, the wear resistance of such composites is not directly proportional to their hardness, and does not follow the standard wear law. A worn surface under a high applied load shows that the 12 vol. % CNT/Ti50Cu28Ni15Sn7 bulk metallic glass composite suffers severe wear compared with monolithic Ti50Cu28Ni15Sn7 bulk metallic glass.
引用
收藏
页数:10
相关论文
共 50 条
  • [31] Stress corrosion cracking and bioactivity of Ti-based bulk metallic glass
    Qin, Fengxiang
    Zhu, Shengli
    Dan, Zhenhua
    Kawashima, Asahi
    Xie, Guoqiang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 615 : S123 - S127
  • [32] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TI-BASED METALLIC GLASS MATRIX COMPOSITES
    Wang, Jianli
    Hu, Wen
    Wang, Lidong
    Wu, Yaoming
    Wang, Limin
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009, 23 (6-7): : 1260 - 1264
  • [33] New Ti-based bulk metallic glasses with exceptional glass forming ability
    Lin, Shifeng
    Liu, Dingming
    Zhu, Zhengwang
    Li, Dan
    Fu, Huameng
    Zhuang, Yanxin
    Zhang, Hongwei
    Li, Hong
    Wang, Aimin
    Zhang, Haifeng
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2018, 502 : 71 - 75
  • [34] Microstructure Evolution and Mechanical Properties of a Ti-Based Bulk Metallic Glass Composite
    J. Cui
    J. S. Li
    J. Wang
    H. C. Kou
    Journal of Materials Engineering and Performance, 2015, 24 : 2354 - 2358
  • [35] Microstructure Evolution of a Ti-Based Bulk Metallic Glass Composite During Deformation
    J. Cui
    J. S. Li
    J. Wang
    H. C. Kou
    Journal of Materials Engineering and Performance, 2015, 24 : 748 - 753
  • [36] Cooling rate effect of nanomechanical response for a Ti-based bulk metallic glass
    Huang, Yongjiang
    Chiu, Yu Lung
    Shen, Jun
    Chen, John J. J.
    Sun, Jianfei
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2010, 356 (20-22) : 966 - 970
  • [37] Control of wetting on Ti-based bulk metallic glass surfaces by a hydrothermal method
    Katsumata, Ken-ichi
    Wada, Takeshi
    Inoue, Akihisa
    Sakai, Munetoshi
    Nakajima, Akira
    Fujishima, Akira
    Matsushita, Nobuhiro
    Okada, Kiyoshi
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (10) : 3430 - 3435
  • [38] Modulating mechanical properties of Ti-based bulk metallic glass composites by tailoring dendrite composition with Sn addition
    Xu, Yuhao
    Zhou, Qing
    Du, Yin
    Ren, Yue
    Zhai, Haimin
    Li, Qiang
    Chen, Jialin
    Wang, Haifeng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 745 : 16 - 25
  • [39] Nanoindentation response of laser shock peened Ti-based bulk metallic glass
    Wang, Liang
    Wang, Lu
    Xue, Yunfei
    Zhang, Haifeng
    Fu, Huameng
    AIP ADVANCES, 2015, 5 (05):
  • [40] Microstructure Evolution of a Ti-Based Bulk Metallic Glass Composite During Deformation
    Cui, J.
    Li, J. S.
    Wang, J.
    Kou, H. C.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (02) : 748 - 753