An investigation of the microstructures and mechanical properties of FeSiBCuAl alloys

被引：0
|
作者：
Cheng, Huichao [1 ]
Song, Min [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
ADVANCES IN TEXTILE ENGINEERING AND MATERIALS | 2013年 / 627卷
关键词：
FeSiBCuAl alloy; mechanical property; microstructure; nanoindentation; ULTRAFINE GRAIN-STRUCTURE; SOFT-MAGNETIC PROPERTIES; BULK GLASSY ALLOYS; AMORPHOUS-ALLOYS; CRYSTALLIZATION; AL; STABILITY; STRENGTH; NB; CU;
D O I：
10.4028/www.scientific.net/AMR.627.646
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fe76.5-xSi13.5B9CuIAlx alloys were fabricated by arc melting method plus copper mould. casting technique. The effects of Al content on the microstructures and mechanical properties of the alloys were investigated. The results showed that the Al content significantly affects the microstructures and mechanical properties of the alloys. The addition of Al element into the alloy results in a variation from nanostructures to coarse grained structures. At the same time, the hardness and elastic modulus decrease with increasing the Al content.
引用
收藏
页码：646 / 650
页数：5
相关论文
共 50 条
  • [21] Investigation on the Microstructures and Mechanical Properties of the Shells of Tridacna crocea
    Li, Baosheng
    Song, Ningjing
    Su, Yue
    Li, Jiangfeng
    Pan, Ercai
    Wang, Chenxu
    Gao, Juan
    Ma, Yurong
    CRYSTAL GROWTH & DESIGN, 2022, 22 (12) : 6903 - 6916
  • [22] Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys
    Huang, Wenjun
    Wang, Xuejiao
    Qiao, Junwei
    Wu, Yucheng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 914
  • [23] Microtextural effects on mechanical properties of duplex microstructures in (α+β) titanium alloys
    Lindemann, J
    Wagner, L
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 263 (02): : 137 - 141
  • [24] Effect of indium on the microstructures and mechanical properties of dental gold alloys
    Jung, H. Y.
    Lee, S. H.
    Doh, J. M.
    Yoon, J. K.
    Lim, H. N.
    ECO-MATERIALS PROCESSING & DESIGN VII, 2006, 510-511 : 738 - 741
  • [25] Microstructures and mechanical properties of TixNbMoTaW refractory high entropy alloys
    Han, Z. D.
    Luan, H. W.
    Liu, X.
    Chen, N.
    Li, X. Y.
    Shao, Y.
    Yao, K. F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 712 : 380 - 385
  • [26] Microstructures and mechanical properties prediction for Ti-based alloys
    Guo, Jianzheng
    Samonds, Mark T.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2007, 16 (06) : 680 - 684
  • [27] Cast Co alloys: microstructures, mechanical properties and fracture mechanisms
    Scavino, G.
    Matteis, P.
    Mortarino, G. M. M.
    Firrao, D.
    METALLURGIA ITALIANA, 2010, (10): : 29 - 37
  • [28] Microstructures and Mechanical Properties Prediction for Ti-Based Alloys
    Jianzheng Guo
    Mark T. Samonds
    Journal of Materials Engineering and Performance, 2007, 16 : 680 - 684
  • [29] Investigation on martensitic transformation behavior, microstructures and mechanical properties of Fe-doped Ni-Mn-In alloys
    Feng, Y.
    Sui, J. H.
    Gao, Z. Y.
    Zhang, J.
    Cai, W.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 507 (1-2): : 174 - 178
  • [30] Refinement of microstructures and improvement of mechanical properties in intermetallic TiAl alloys by rheocasting
    MITI, Japan
    Nippon Kinzoku Gakkaishi, 5 (571-577):
12345