Measurement of effective hydrogen diffusivity using the Scanning Kelvin Probe

被引：50

作者：

Schaller, R. F. ^{[1
]}

Scully, J. R. ^{[1
]}

机构：

[1] Univ Virginia, Dept Mat Sci & Engn, Charlottesville, VA 22904 USA

来源：

ELECTROCHEMISTRY COMMUNICATIONS | 2014年 / 40卷

关键词：

Scanning Kelvin Probe; Effective hydrogen diffusivity; FORCE MICROSCOPY; IRON; PERMEATION; DEUTERIUM; STEEL; TOOL; GAS;

D O I：

10.1016/j.elecom.2013.12.025

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

Effective hydrogen diffusivity (D-H,D-eff) was determined utilizing the Scanning Kelvin Probe (SKP) to measure the SKP voltage on cross-sectioned, hydrogen pre-charged samples at 25 degrees C. Two secondary hardened martensitic steels, Fe-13Co-11Ni-3Cr-1.2Mo-0.2C-0.02Mn and Fe-11Ni-12Cr-lMo-0.005C-0.02Mn (wt%) were evaluated. D-H,D-eff was 1.5 to 2 x 10(-8) cm(2)/s. Results compared well to previously reported measurements for Fe-13Co-11Ni-3Cr-1.2Mo-0.2C-0.02Mn steel using isothermal Thermal Desorption (TDS) and an Arrhenius relationship to obtain an average D-H,D-eff of 8.96 x 10(-9) cm(2)/s at 25 degrees C (Thomas etal., 2002). (C) 2013 Elsevier By. All rights reserved.

引用

页码：42 / 44

页数：3

共 50 条

[31] Detection of Hidden Defects Induced by Thermomechanical Processing of Aluminum Substrates for Sensor Devices Using a Scanning Kelvin Probe [J].

Zharin, A. L. ;

Gasenkova, I. V. ;

Tyavlovsky, A. K. ;

Mukhurov, N. I. ;

Spitski, S. I. .

DEVICES AND METHODS OF MEASUREMENTS, 2025, 16 (01) :47-54

[32] Latent Fingerprint Visualization using a Scanning Kelvin Probe in Conjunction with Vacuum Metal Deposition [J].

Dafydd, Hefin ;

Williams, Geraint ;

Bleay, Stephen .

JOURNAL OF FORENSIC SCIENCES, 2014, 59 (01) :211-218

[33] Influence of atmospheric oxygen on hydrogen detection on Pd using Kelvin probe technique [J].

Gabriela Schimo ;

Wolfgang Burgstaller ;

Achim Walter Hassel .

Journal of Solid State Electrochemistry, 2018, 22 :495-504

[34] Influence of atmospheric oxygen on hydrogen detection on Pd using Kelvin probe technique [J].

Schimo, Gabriela ;

Burgstaller, Wolfgang ;

Hassel, Achim Walter .

JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 2018, 22 (02) :495-504

[35] Spatial determination of diffusible hydrogen concentrations proximate to pits in a Fe-Cr-Ni-Mo steel using the Scanning Kelvin Probe [J].

Schaller, R. F. ;

Scully, J. R. .

ELECTROCHEMISTRY COMMUNICATIONS, 2016, 63 :5-9

[36] Micro-cells beneath organic lacquers: a study using scanning Kelvin probe and scanning acoustic microscopy [J].

Doherty, M ;

Sykes, JM .

CORROSION SCIENCE, 2004, 46 (05) :1265-1289

[37] Suitability of Various Materials for Probes in Scanning Kelvin Probe Measurements [J].

Huber, Silvia ;

Wicinski, Mariusz ;

Hassel, Achim Walter .

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2018, 215 (15)

[38] Scanning Kelvin Probe Microscopy on Bulk Heterojunction Polymer Blends [J].

Maturova, Klara ;

Kemerink, Martijn ;

Wienk, Martijn M. ;

Charrier, Dimitri S. H. ;

Janssen, Rene A. J. .

ADVANCED FUNCTIONAL MATERIALS, 2009, 19 (09) :1379-1386

[39] Scanning Kelvin Probe study on the stability of the steel/coating interfaces contaminated by soluble salts [J].

de la Fuente, D. ;

Rohwerder, M. ;

Chico, B. ;

Morcillo, M. .

DIFFUSION IN MATERIALS - DIMAT2008, 2009, 289-292 :253-+

[40] The finding of crystallographic orientation dependence of hydrogen diffusion in austenitic stainless steel by scanning Kelvin probe force microscopy [J].

Hua, Zhengli ;

An, Bai ;

Iijima, Takashi ;

Gu, Chaohua ;

Zheng, Jinyang .

SCRIPTA MATERIALIA, 2017, 131 :47-50

← 1 2 3 4 5 →