Kinetics of oxide scale growth on a (Ti, Mo)5Si3 based oxidation resistant Mo-Ti-Si alloy at 900-1300°C

被引:7
作者
Majumdar, Sanjib [1 ]
Singh, Pankaj Kumar [2 ,3 ]
Pandey, Ajoy Kumar [2 ]
Rao, G. V. S. Nageswara [2 ]
机构
[1] Bhabha Atom Res Ctr, Mat Proc & Corros Engn Div, High Temp Mat Dev Sect, Mumbai 400085, Maharashtra, India
[2] Natl Inst Technol, Warangal 506004, Telangana, India
[3] Hiroshima Univ, Grad Sch Adv Sci Matter, Hiroshima 7398530, Japan
关键词
High-temperature; Oxidation; Oxide scale; Kinetics; Activation energy; HIGH-TEMPERATURE OXIDATION; B ALLOYS; THERMAL-OXIDATION; TITANIUM SILICIDE; BEHAVIOR; CREEP; MICROSTRUCTURE;
D O I
10.1515/htmp-2019-0056
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
High-temperature oxidation behaviour of Mo-40Ti-30Si (at.%) alloy was investigated in the temperature regime of 900-1300 degrees C in air. Isothermal weight change data recorded up to 100 h of exposure revealed parabolic weight gain kinetics at all the tested temperatures. The protective oxide scale composed with SiO2 (silica) and TiO2 (titania) forming a duplex oxide microstructure consisting of TiO2 particles embedded in the continuous SiO2 matrix. The oxide scale showed parabolic growth kinetics, and the activation energies for the scale growth were found to be 72.2 kJ/mol in 900-1200 degrees C and 324.9 kJ/mol in 1200-1300 degrees C. The kinetics of the protective scale growth on the alloy surface was mainly controlled by the growth of the silica film and the inward diffusion of oxygen through the duplex oxide layer.
引用
收藏
页码:533 / 540
页数:8
相关论文
共 50 条
  • [41] Preparation and high temperature oxidation resistance of laser deposited Ti5Si3/MoSi2/Mo5Si3 reinforced α-Ti/NiTi composite coatings
    Liang, Jue
    Liu, Xiu-Bo
    Ke, Jin
    Luo, Ying-She
    Liang, Liang
    SURFACE & COATINGS TECHNOLOGY, 2019, 372 : 56 - 64
  • [42] Synthesis of a novel MoSS+Mo5SiB2+Mo5Si3 based Mo-Si-B alloy and its enhanced fracture toughness
    Yang, Tao
    Wu, Jianbo
    Huang, Min
    Zhu, Liu
    Wang, Jinfang
    Wang, Tianle
    Fang, Yihang
    Yan, Zixin
    Levchenko, Vladimir
    VACUUM, 2022, 203
  • [43] A novel composite Si-Mo-Ti coating with Ti concentration gradient for Nb-Si based ultrahigh temperature alloy prepared by slurry sintering
    Li, Longfei
    Guo, Xiping
    Qiao, Yanqiang
    CORROSION SCIENCE, 2023, 225
  • [44] Hot corrosion behaviour of Mo-62Si-5B (at. %) alloy in different molten salts at 900°C
    Wei, Lan
    Shao, Wei
    Li, Meifeng
    Zhou, Chungen
    CORROSION SCIENCE, 2019, 158
  • [45] High temperature oxidation behavior of Ti5Si3-based intermetallics
    Tang, Zhihong
    Williams, Jason J.
    Thom, Andrew J.
    Akinc, Mufit
    INTERMETALLICS, 2008, 16 (09) : 1118 - 1124
  • [46] Oxidation behavior of Mo≤5Si3C≤1 and its composites
    Q. Zhu
    K. Shobu
    E. Tani
    K. Kishi
    S. Umebayashi
    Journal of Materials Science, 2000, 35 : 863 - 872
  • [47] Mechanical properties and microstructure of Ti5Si3 based composites prepared by combination of MASHS and SPS in Ti-Si-Ni and Ti-Si-Ni-C systems
    Kasraee, Kian
    Yousefpour, Mardali
    Tayebifard, Seyed Ali
    MATERIALS CHEMISTRY AND PHYSICS, 2019, 222 : 286 - 293
  • [48] Microstructure and oxidation resistance of Si-MoSi2 ceramic coating on TZM (Mo-0.5Ti-0.1Zr-0.02C) alloy at 1500°C
    Zhang, Yingyi
    Yu, Laiho
    Fu, Tao
    Wang, Jie
    Shen, Fuqiang
    Cui, Kunkun
    Wang, Hong
    SURFACE & COATINGS TECHNOLOGY, 2022, 431
  • [49] Oxidation of Ti3Al0.3Si0.7C2 Compounds at 900-1200°C in Air
    Lee, Jae Chun
    Park, Sang Whan
    Lee, Dong Bok
    CURRENT NANOSCIENCE, 2014, 10 (01) : 97 - 100
  • [50] Ti-Al-N/Mo-Si-B multilayers: An architectural arrangement for high temperature oxidation resistant hard coatings
    Riedl, H.
    Aschauer, E.
    Koller, C. M.
    Polcik, P.
    Arndt, M.
    Mayrhofer, P. H.
    SURFACE & COATINGS TECHNOLOGY, 2017, 328 : 80 - 88