Kinetics of oxide scale growth on a (Ti, Mo)5Si3 based oxidation resistant Mo-Ti-Si alloy at 900-1300°C

被引:7
|
作者
Majumdar, Sanjib [1 ]
Singh, Pankaj Kumar [2 ,3 ]
Pandey, Ajoy Kumar [2 ]
Rao, G. V. S. Nageswara [2 ]
机构
[1] Bhabha Atom Res Ctr, Mat Proc & Corros Engn Div, High Temp Mat Dev Sect, Mumbai 400085, Maharashtra, India
[2] Natl Inst Technol, Warangal 506004, Telangana, India
[3] Hiroshima Univ, Grad Sch Adv Sci Matter, Hiroshima 7398530, Japan
关键词
High-temperature; Oxidation; Oxide scale; Kinetics; Activation energy; HIGH-TEMPERATURE OXIDATION; B ALLOYS; THERMAL-OXIDATION; TITANIUM SILICIDE; BEHAVIOR; CREEP; MICROSTRUCTURE;
D O I
10.1515/htmp-2019-0056
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
High-temperature oxidation behaviour of Mo-40Ti-30Si (at.%) alloy was investigated in the temperature regime of 900-1300 degrees C in air. Isothermal weight change data recorded up to 100 h of exposure revealed parabolic weight gain kinetics at all the tested temperatures. The protective oxide scale composed with SiO2 (silica) and TiO2 (titania) forming a duplex oxide microstructure consisting of TiO2 particles embedded in the continuous SiO2 matrix. The oxide scale showed parabolic growth kinetics, and the activation energies for the scale growth were found to be 72.2 kJ/mol in 900-1200 degrees C and 324.9 kJ/mol in 1200-1300 degrees C. The kinetics of the protective scale growth on the alloy surface was mainly controlled by the growth of the silica film and the inward diffusion of oxygen through the duplex oxide layer.
引用
收藏
页码:533 / 540
页数:8
相关论文
共 50 条
  • [1] Effect of Si content on microstructure, mechanical and oxidation properties of hot pressed Mo-Ti-Si alloys
    Majumdar, Sanjib
    Paul, Bhaskar
    Singh, Pankaj Kumar
    Kishor, Jugal
    Kain, Vivekanand
    INTERMETALLICS, 2018, 100 : 126 - 135
  • [2] High-temperature oxidation behaviour of a single-phase (Mo,Ti)5Si3 (Mo-Si-Ti) alloy
    Burk, Steffen
    Gorr, Bronislava
    Christ, Hans-Juergen
    Schliephake, Daniel
    Heilmaier, Martin
    Hochmuth, Christian
    Glatzel, Uwe
    SCRIPTA MATERIALIA, 2012, 66 (05) : 223 - 226
  • [3] Microstructural and chemical constitution of the oxide scale formed on a pesting-resistant Mo-Si-Ti alloy
    Obert, Susanne
    Kauffmann, Alexander
    Seils, Sascha
    Boll, Torben
    Kauffmann-Weiss, Sandra
    Chen, Hans
    Anton, Ronja
    Heilmaier, Martin
    CORROSION SCIENCE, 2021, 178
  • [4] Highly oxidation-resistant Ti-Mo alloy with two-scale network Ti5Si3 reinforcement
    Lu, Qiong
    Lv, Yaozha
    Zhang, Chi
    Zhang, Hongbo
    Chen, Wei
    Xu, Zhanyuan
    Feng, Peizhong
    Fan, Jinglian
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2022, 110 : 24 - 34
  • [5] Effect of Ti addition on the kinetics and mechanism of non-isothermal and isothermal oxidation of Nb-Si-Mo alloys at 900 °C-1200 °C
    Sala, Kasturi
    Kashyap, Sunil Kumar
    Mitra, Rahul
    INTERMETALLICS, 2021, 138
  • [6] Oxidation behavior of Nb-20Mo-15Si-5B-20Ti alloy in air from 700 to 1300°C
    Portillo, Benedict I.
    Varma, S. K.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 497 (1-2) : 68 - 73
  • [7] Oxidation of a Mo-Si-B-Ti Alloy
    Liu, Longfei
    Wood, Liam F.
    Nelaturu, Phalgun
    Duan, Tianrui
    Zhang, Chuan
    Zhang, Fan
    Thoma, Dan J.
    Perepezko, John H.
    HIGH TEMPERATURE CORROSION OF MATERIALS, 2024, 101 (06) : 1383 - 1393
  • [8] Oxidation resistance of a Mo-W-Si-B alloy at 1000-1300 °C: The effect of a multicomponent Mo-Si-B coating
    Ouyang, Gaoyuan
    Ray, Pratik K.
    Thimmaiah, Srinivasa
    Kramer, Matthew J.
    Akinc, Mufit
    Ritt, Patrick
    Perepezko, John H.
    APPLIED SURFACE SCIENCE, 2019, 470 : 289 - 295
  • [9] The Creep and Oxidation Behaviour of Pesting-Resistant (Mo,Ti)5Si3-Containing Eutectic-Eutectoid Mo-Si-Ti Alloys
    Obert, Susanne
    Kauffmann, Alexander
    Pretzler, Rupert
    Schliephake, Daniel
    Hinrichs, Frauke
    Heilmaier, Martin
    METALS, 2021, 11 (01) : 1 - 19
  • [10] Oxidation behavior of MoSi2 and Mo(Si, Al)2 coated Mo-0.5Ti-0.1Zr-0.02C alloy
    Majumdar, S.
    Sharma, I. G.
    INTERMETALLICS, 2011, 19 (04) : 541 - 545