Effect of Spark Plasma Sintering Temperature on the Properties of Transparent YSZ Ceramics

被引:8
|
作者
Dvilis, E. S. [1 ]
Paigin, V. D. [1 ]
Stepanov, S. A. [1 ]
Khasanov, O. L. [1 ]
Valiev, D. T. [1 ]
Polisadova, E. F. [1 ]
Vaganov, V. [1 ]
Alishin, T. R. [1 ]
Dudina, D. V. [1 ]
机构
[1] Natl Res Tomsk Polytech Univ, Fed State Autonomous Educ Inst Higher Educ, Tomsk, Russia
基金
俄罗斯科学基金会; 俄罗斯基础研究基金会;
关键词
yttria-stabilized zirconia (YSZ); transparent ceramics; spark plasma sintering (SPS); optical properties; mechanical properties; YTTRIA-STABILIZED ZIRCONIA;
D O I
10.1007/s11148-019-00327-9
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
A transparent submicron-grain sized cubic yttria-stabilized ZrO2 ceramics was obtained by spark plasma sintering in the temperature range from 1200 to 1400 degrees C at a relatively low pre-pressing pressure (100 MPa). The produced ceramic samples have demonstrated high light transmission in the visible and near-infrared spectral regions. The paper presents elastoplastic properties and microstructure of the ceramics and discusses the relationship between the optical and elastoplastic characteristics, as well as microstructure.
引用
收藏
页码:154 / 159
页数:6
相关论文
共 50 条
  • [1] Effect of Spark Plasma Sintering Temperature on the Properties of Transparent YSZ Ceramics
    É. S. Dvilis
    V. D. Paigin
    S. A. Stepanov
    O. L. Khasanov
    D. T. Valiev
    E. F. Polisadova
    V. Vaganov
    T. R. Alishin
    D. V. Dudina
    Refractories and Industrial Ceramics, 2019, 60 : 154 - 159
  • [2] Relationship of Optical Properties and Elastoplastic Characteristics of Transparent Spark-Plasma-Sintered YSZ Ceramics
    Khasanov, O. L.
    Dvilis, E. S.
    Bikbaeva, Z. G.
    Paygin, V. D.
    Khasanov, A.
    JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY, 2017, 8 (01): : 161 - 167
  • [3] Effect of technological parameters on optical and mechanical properties of Spark Plasma Sintered transparent YSZ ceramics
    Paygin, V.
    Stepanov, S.
    Dvilis, E.
    Khasanov, O.
    Alishin, T.
    Valiev, D.
    CERAMICS INTERNATIONAL, 2021, 47 (08) : 11169 - 11175
  • [4] Effect of sintering temperature on microstructure and properties of silicon nitride ceramics by spark plasma sintering
    Liu J.
    Xie Z.
    Li Z.
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2016, 44 (03): : 403 - 407
  • [5] Spark plasma sintering of aluminium nitride transparent ceramics
    Fu, ZY
    Liu, JF
    Wang, H
    He, DH
    Zhang, QJ
    MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (09) : 1097 - 1099
  • [6] Fabrication and optical properties of highly transparent MgO ceramics by spark plasma sintering
    Chen, Xianqiang
    Wu, Yiquan
    SCRIPTA MATERIALIA, 2019, 162 : 14 - 17
  • [7] Effect of sintering temperature on the densification and optical properties of spark plasma sintered ZnSe ceramics
    Ehsani, Marzieh
    Safian, Saman
    Zakeri, Mohammad
    Rahimipour, Mohammad Reza
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (05) : 454 - 459
  • [8] Transparent β-tricalcium phosphate ceramics prepared by spark plasma sintering
    Kawagoe, D
    Ioku, K
    Fujimori, H
    Goto, S
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2004, 112 (1308) : 462 - 463
  • [9] Characterization of Transparent Fluorapatite Ceramics Fabricated by Spark Plasma Sintering
    Furuse, Hiroaki
    Kato, Daichi
    Morita, Koji
    Suzuki, Tohru S.
    Kim, Byung-Nam
    MATERIALS, 2022, 15 (22)
  • [10] Effect of the spark plasma sintering parameters, LiF additive, and Nd dopant on the microwave dielectric and optical properties of transparent YAG ceramics
    Zhang, Xiaorong
    Fan, Guifen
    Lu, Wenzhong
    Chen, Yihong
    Ruan, Xuefeng
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2016, 36 (11) : 2767 - 2772