Electropulsing induced evolution of grain-boundary precipitates without loss of strength in the 7075 Al alloy

被引:44
作者
Xu, Xiaofeng
Zhao, Yuguang [1 ]
Ma, Bingdong
Zhang, Ming
机构
[1] Jilin Univ, Minist Educ, Key Lab Automobile Mat, Changchun 130025, Peoples R China
基金
中国国家自然科学基金;
关键词
7075 Al alloy; Grain boundaries; Precipitates; Microstructure; Electropulsing; MECHANICAL-PROPERTIES; MG ALLOY; MICROSTRUCTURE; BEHAVIOR;
D O I
10.1016/j.matchar.2015.05.007
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The influence of electropulsing on the peak-aged (T6) microstructures in the 7075 Al alloy was investigated in this study. The results show that parts of the intragranular precipitates dissolve in the matrix during electropulsing, and the electropulsing treated sample exhibits discontinuous dissolution of the grain-boundary precipitates (GBP). After re-aging, the mechanical properties of the re-aged (RA) sample are nearly the same as that of T6 temper, meanwhile, the grown discontinuous GBP were obtained. Hence it is a promising method to change the distribution of GBP without loss the strength in the 7075 Al alloy. (C) 2015 Elsevier Inc. All rights reserved.
引用
收藏
页码:90 / 94
页数:5
相关论文
共 24 条
[1]   PRECIPITATION PROCESS IN AN AL-ZN-MB ALLOY [J].
ASANO, K ;
HIRANO, KI .
TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1968, 9 (01) :24-&
[2]   GP-zones in Al-Zn-Mg alloys and their role in artificial aging [J].
Berg, LK ;
Gjonnes, J ;
Hansen, V ;
Li, XZ ;
Knutson-Wedel, M ;
Waterloo, G ;
Schryvers, D ;
Wallenberg, LR .
ACTA MATERIALIA, 2001, 49 (17) :3443-3451
[3]   The Effect of the Surface Treating and High-Temperature Aging on the Strength and SCC Susceptibility of 7075 Aluminum Alloy [J].
Fooladfar, Hamidreza ;
Hashemi, Babak ;
Younesi, Mousa .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (06) :852-859
[4]   Evolution of Grain Boundary Precipitates in Al 7075 Upon Aging and Correlation with Stress Corrosion Cracking Behavior [J].
Goswami, Ramasis ;
Lynch, Stanley ;
Holroyd, N. J. Henry ;
Knight, Steven P. ;
Holtz, Ronald L. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (03) :1268-1278
[5]   On the birth of GP zones [J].
Guinier, A .
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 :3-6
[6]  
Huang B.Y., 2005, CHINA MAT ENG
[7]   Influence of high-temperature pre-precipitation on local corrosion behaviors of Al-Zn-Mg alloy [J].
Huang, L. P. ;
Chen, K. H. ;
Li, S. ;
Song, M. .
SCRIPTA MATERIALIA, 2007, 56 (04) :305-308
[8]   Effect of electropulsing treatment on solid solution behavior of an aged Mg alloy AZ61 strip [J].
Jiang, Yanbin ;
Tang, Guoyi ;
Guan, Lei ;
Wang, Shaonan ;
Xu, Zhuohui ;
Shek, Chanhung ;
Zhu, Yaohua .
JOURNAL OF MATERIALS RESEARCH, 2008, 23 (10) :2685-2691
[9]   Influence of electropulsing treatment on microstructure and mechanical properties of cold-rolled Mg-9Al-1Zn alloy strip [J].
Jiang, Yanbin ;
Guan, Lei ;
Tang, Guoyi ;
Shek, Chanhung ;
Zhang, Zhihao .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (16-17) :5627-5635
[10]   On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in an aged Mg-9Al-1Zn alloy [J].
Jiang, Yanbin ;
Tang, Guoyi ;
Shek, Chanhung ;
Zhu, Yaohua ;
Xu, Zhuohui .
ACTA MATERIALIA, 2009, 57 (16) :4797-4808