Simple and efficient control of DSTATCOM in three-phase four-wire polluted grid system using MCCF-SOGI based controller

Load current may become highly distorted in a weak power system network due to the presence of non-linear and dynamic loads. Harmonics get penetrated into the supply system too; thereby making it polluted and rich in harmonic content and causing a detrimental effect on the performance of other connected loads. In such cases, the conventional control algorithms fail to work effectively to mitigate power quality (PQ) issues. This study addresses solutions to PQ issues which get aggravated in the presence of distorted supply. This study proposes a multiple complex coefficient filter (MCCF)-second-order generalised integrator (SOGI)-based controller designed to effectively compensate for PQ problems associated with weak grid. A MCCF filter is designed to extract the fundamental components of grid voltage used further for grid synchronisation. The SOGI is designed to extract the fundamental active current magnitude of the load current and reduce PQ issues with the help of Distributed Static Compensator (DSTATCOM). Neutral current compensation is achieved with an appropriately designed zigzag transformer. Extensive simulation and hardware results realising dSPACE 1104 as Digital Signal Processor are considered in this study to show that the performance of the proposed control algorithm under PQ issues with distorted grid<?show [AQ ID=Q1]?>.