A Newly Generated Nearly Lamellar Microstructure in Cast Ti-48Al-2Nb-2Cr Alloy for High-Temperature Strengthening

被引：33

作者：

Gao, Zitong ^{[1
]}

Yang, Jieren ^{[1
]}

Wu, Yulun ^{[1
]}

Hu, Rui ^{[1
]}

Kim, Sang-Lan ^{[2
]}

Kim, Young-Won ^{[2
]}

机构：

[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Shaanxi, Peoples R China

[2] Gamteck LLC, Dayton, OH 45431 USA

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2019年 / 50卷 / 12期

基金：

中国国家自然科学基金;

关键词：

TIAL-BASED ALLOYS; MECHANICAL-PROPERTIES; INTERMETALLIC ALLOYS; HIGH-NB; TITANIUM; PHASE; TI-45AL-(8-9)NB-(W; TRANSFORMATION; DEFORMATION; KINETICS;

D O I：

10.1007/s11661-019-05491-8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Alloy 4822 (Ti-48Al-2Cr-2Nb at. pct) cast material was given a controlled heat treatment cycle to generate a casting nearly lamellar (CNL) microstructure that enhances the temperature capability over its current engineering casting duplex (CDP) microstructure form. The cycle consisted of three steps: a short alpha field annealing, an alpha + gamma field annealing, and then aging at a low temperature, with each step being followed by controlled cooling. The resulted microstructure is shown to be a mixture of non-uniformly distributed similar to 250 mu m size lamellar colonies containing similar to 0.15 mu m spaced laths. Standard tensile testing at 700 degrees C shows a yield stress of 344 MPa that is similar to 55 MPa greater than that of the current engineering CDP form. The sequential microstructure evolution processes following the three-step thermal cycle are assessed and explained in terms of phase transformations taking place across and below the alpha transus upon isothermal treatment and subsequent cooling. The resulted increases in high-temperature strengthening are explained by the colony and gamma grain size distributions. The strengthening mechanism along with the significance is discussed.

引用

页码：5839 / 5852

页数：14

共 41 条

[41] Response of the solidification microstructure of a high Nb containing TiAl alloy to an isothermal high-temperature heat treatment [J].

Yang, Guang ;

Kou, Hongchao ;

Liu, Yi ;

Yang, Jieren ;

Wang, Jun ;

Zhang, Shouyin ;

Li, Jinshan ;

Fu, Hengzhi .

INTERMETALLICS, 2015, 63 :1-6

← 1 2 3 4 5 →