Influence of Welding Parameters and Filler Material on the Mechanical Properties of HSLA Steel S960MC Welded Joints

被引：17

作者：

Mician, Milos ^{[1
]}

Fratrik, Martin ^{[1
]}

Kajanek, Daniel ^{[2
]}

机构：

[1] Univ Zilina, Fac Mech Engn, Univ 8215-1, Zilina 01026, Slovakia

[2] Univ Zilina, Res Ctr, Univ 8215-1, Zilina 01026, Slovakia

来源：

METALS | 2021年 / 11卷 / 02期

关键词：

TMCP steels; S960MC; softening; soft zone of HAZ; metal-cored wire;

D O I：

10.3390/met11020305

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This article provides an overview of the influence of welding parameters and filler material on changes in the heat-affected zone (HAZ) of thermo-mechanically controlled processed (TMCP) steel welded joints. The research focused on evaluating the effect of heat input and cooling rate on the width of the soft zone, which significantly affects the mechanical properties of welded joints. The negative effect of the soft zone is more pronounced as the thickness of the material decreases. Therefore, the object of this research was a 3-mm-thick sheet of S960MC steel welded by gas metal arc welding (GMAW) and metal-cored arc welding (MCAW) technology. Variable welding parameters were reflected in different heat input and cooling rate values, which led to a change in the properties of the HAZ and thus the mechanical properties of the welded joints. The changes in the HAZ were analyzed by microscopic analysis and mechanical testing. The measured results showed a significant effect of heat input on the cooling rate, which considerably affected the width of the soft zone in the HAZ and thus the overall mechanical properties of the welded joints.

引用

页码：1 / 19

页数：18

共 38 条

[1]

Bang KS, 2002, WELD J, V81, p174S

[2] Effect of Heat Input and Undermatched Filler Wire on the Microstructure and Mechanical Properties of Dissimilar S700MC/S960QC High-Strength Steels [J].

Bayock, Francois Njock ;

Kah, Paul ;

Mvola, Belinga ;

Layus, Pavel .

METALS, 2019, 9 (08)

[3] The weldability of modern structural TMCP steels [J].

deMeester, B .

ISIJ INTERNATIONAL, 1997, 37 (06) :537-551

[4] WELDABILITY OF S500MC STEEL IN UNDERWATER CONDITIONS [J].

Fydrych, D. ;

Labanowski, J. ;

Rogalski, G. ;

Haras, J. ;

Tomkow, J. ;

Swierczynska, A. ;

Jakobczak, P. ;

Kostro, L. .

ADVANCES IN MATERIALS SCIENCE, 2014, 14 (02) :37-45

[5] Effect of Welding Heat Input on Simulated HAZ Areas in S960QL High Strength Steel [J].

Gaspar, Marcell .

METALS, 2019, 9 (11)

[6]

Golyakevich Andrey A., 2020, Advanced Materials Research, V1157, P113, DOI 10.4028/www.scientific.net/AMR.1157.113

[7] Assessment of the Effect of Laser Welding on the Properties and Structure of TMCP Steel Butt Joints [J].

Gorka, Jacek .

MATERIALS, 2020, 13 (06)

[8] Assessment of the Weldability of T-Welded Joints in 10 mm Thick TMCP Steel Using Laser Beam [J].

Gorka, Jacek .

MATERIALS, 2018, 11 (07)

[9] Microstructure and mechanical properties of laser welded S960 high strength steel [J].

Guo, Wei ;

Crowther, Dave ;

Francis, John A. ;

Thompson, Alan ;

Liu, Zhu ;

Li, Lin .

MATERIALS & DESIGN, 2015, 85 :534-548

[10]

Gyu-Baek A, 2008, MATER SCI FORUM, V580-582, P589, DOI 10.4028/0-87849-383-2.589

← 1 2 3 4 →