Novel materials for electronic device fabrication using ink-jet printing technology

Novel materials and a metallization technique for the printed electronics were studied. Insulator inks and conductive inks were investigated. For the conductive ink, the nano-sized copper particles were used as metallic sources. These particles were prepared from a copper complex by a laser irradiation process in the liquid phase. Nano-sized copper particles were consisted of a thin copper oxide layer and a metal copper core wrapped by the layer. The conductive ink showed good ink-jettability. In order to metallize the printed trace of the conductive ink on a substrate, the atomic hydrogen treatment was carried out. Atomic hydrogen was generated on a heated tungsten wire and carried on the substrate. The temperature of the substrate was up to 60 degrees C during the treatment. After the treatment, the conductivity of a copper trace was 3 mu Omega cm. It was considered that printed wiring boards can be easily fabricated by employing the above materials. (C) 2009 Elsevier B.V. All rights reserved.