Receding Horizon based Trajectory Planning and Two-Degree-of-Freedom Tracking Control for Fast Sampling Constrained Systems

被引:0
|
作者
Doetlinger, Alexander [1 ]
Stumper, Jean-Francois [1 ]
Kennel, Ralph [1 ]
机构
[1] Tech Univ Munich, Inst Elect Drive Syst & Power Elect, Dept Elect Engn & Informat Technol, Arcisstr 21, D-80333 Munich, Germany
来源
2013 IEEE INTERNATIONAL SYMPOSIUM ON SENSORLESS CONTROL FOR ELECTRICAL DRIVES AND PREDICTIVE CONTROL OF ELECTRICAL DRIVES AND POWER ELECTRONICS (SLED/PRECEDE) | 2013年
关键词
GENERATION; DESIGN; MPC;
D O I
暂无
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper presents a trajectory planning method inspired by receding horizon based control -for example model predictive control. To plan a trajectory that is perfectly trackable by an underlying controller, a cost functional with input and state constraints is minimized. The proposed planning method is decoupled from a very fast sampling control system in the 100 kHz range because of the relatively high computational demand. This structure allows to profit from the advantages of model predictive control, such as the handling of constraints, even for very fast sampling systems. Here the state and input trajectories which are naturally available in receding horizon based trajectory planning are used to improve the tracking behavior with the help of a dynamic feed-forward path. This concept of dynamic feed-forward control enables perfect tracking of the planned trajectory even in dynamic operation. Experimental results demonstrate the effectiveness of the proposed planning and control approach for a highly dynamical two-mass system. The proposed scheme is compared to two conventional control techniques.
引用
收藏
页数:6
相关论文
共 22 条
  • [1] Receding Horizon based Trajectory Planning for Biaxial Systems
    Doetlinger, Alexander
    Kennel, Ralph
    2013 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM): MECHATRONICS FOR HUMAN WELLBEING, 2013, : 152 - 157
  • [2] ROBUST TRACKING IN TWO-DEGREE-OF-FREEDOM CONTROL SYSTEMS: MAGNETIC LEVITATION SYSTEM
    Teppa-Garran, P.
    Faggioni, M.
    LATIN AMERICAN APPLIED RESEARCH, 2023, 53 (04) : 303 - 308
  • [3] Trajectory Control of Two-Degree-of-Freedom Sweet Potato Transplanting Robot Arm
    Liu, Zhengduo
    Lv, Zhaoqin
    Zheng, Wenxiu
    Wang, Xu
    IEEE ACCESS, 2022, 10 : 26294 - 26306
  • [4] U-Model-Based Two-Degree-of-Freedom Internal Model Control of Nonlinear Dynamic Systems
    Li, Ruobing
    Zhu, Quanmin
    Narayan, Pritesh
    Yue, Alex
    Yao, Yufeng
    Deng, Mingcong
    ENTROPY, 2021, 23 (02) : 1 - 23
  • [5] Two-degree-of-freedom MIMO control for hydraulic servo-systems with switching properties
    Schroeders, Simon
    Maier, Clemens C.
    Ebner, Wolfgang
    Fidlin, Alexander
    Hametner, Christoph
    CONTROL ENGINEERING PRACTICE, 2020, 95 (95)
  • [6] Two-Degree-of-Freedom Control of Linear Systems Subject to Input Amplitude and Rate Constraints
    Kefferpuetz, Klaus
    Ackermann, Carlo
    Adamy, Juergen
    AT-AUTOMATISIERUNGSTECHNIK, 2012, 60 (03) : 155 - 167
  • [7] Robust tuning of Two-Degree-of-Freedom (2-DoF) PI/PID based cascade control systems
    Alfaro, V. M.
    Vilanova, R.
    Arrieta, O.
    JOURNAL OF PROCESS CONTROL, 2009, 19 (10) : 1658 - 1670
  • [8] Two-Degree-of-Freedom Control of a Dual-Stage Actuator Positioning System for Short-Span Tracking
    Zheng, Jinchuan
    Su, Weizhou
    Fu, Minyue
    2009 AMERICAN CONTROL CONFERENCE, VOLS 1-9, 2009, : 3681 - +
  • [9] Receding Horizon Control Strategies for Constrained LPV Systems Based on a Class of Nonlinearly Parameterized Lyapunov Functions
    Garone, Emanuele
    Casavola, Alessandro
    IEEE TRANSACTIONS ON AUTOMATIC CONTROL, 2012, 57 (09) : 2354 - 2360
  • [10] Robust Control of a Two-Degree-of-Freedom Flexure-Based Nanopositioner for Planar Scanning Tasks
    Cheng, Zilong
    Ma, Jun
    Wang, Wenxin
    Zhang, Xiaoxue
    Chen, Xiaolong
    Li, Xiaocong
    Zhu, Haiyue
    Lee, Tong Heng
    2021 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN, AND CYBERNETICS (SMC), 2021, : 498 - 503